United States - Patriot missile spares (multiple nsns) – sole source lockheed Martin

Description

View Changes Amendment 0004 change proposal due date to 26 September 2024. _______________________________________________________________________

Amendment 0003 change proposal due date to 12 September 2024. _______________________________________________________________________

Amendment 0002 change proposal due date to 24 July 2024. _______________________________________________________________________

SPRRA224R0016 PROPOSAL DUE DATE IS EXTENDED FROM 29 APRIL 2024 TO 20 JUNE 2024. 
____________________

The Defense Logistics Agency (DLA) is issuing solicitation SPRRA224R0016 to add parts to the new
subsumable contract to the Captains of Industry (COI) contract, SPE4AX-22-D-9000 (DLA Huntsville
Spares) for fiscal years, 2025 (FY25) through 2027 (FY27).
The subsumable contract will fall under the Lockheed Martin COI / Umbrella contract, SPE4AX22D9000.
These parts will support the Patriot Missile Weapon System.
This is a sole sourced requirement and as such is being procured in accordance with FAR 6.302-1(a)(2); “…only one responsible source and no other supplies or services will satisfy agency requirements.”
Cost and Pricing
Proposal Content/Cost/Price Supporting Documentation. At a minimum, offeror proposal shall include
the following:
The Government contemplates Firm-Fixed-Pricing (FFP) for this effort in accordance with the
overarching basic contract, and requests pricing for three (3) years. This is an RFP for part number
support requirements generated by the Army Aviation and Missile Command (AMCOM) Logistics
Center (ALC) Project Offices used on the Patriot Missile Weapon System.
The offeror shall prepare one summary schedule. Along with the summary schedule, the offeror shall
provide fully supportable cost data which substantiates the offeror’s summary schedule for the P/Ns.
Submission must include working Excel files with applicable excel formulas, showing direct cost inputs
and building to the proposed cost. Files are required at every level, to include inter-organizational work (if
applicable). Submission shall be in accordance with FAR 15.408, Table 15-2, Instructions for Submitting
Cost/Price Proposals When Certified Cost or Pricing Data Are Required. Back up documentation shall
detail the labor categories to be used, labor hours proposed by category, material and equipment cost, and a total cost breakdown. The offeror shall also provide supporting cost/price documentation for all
proposed subcontractors, to include the proposed type of subcontract.
To comply with this solicitation, the offeror is required to price Fiscal Years 2025 - 2027 (FY25-27).
Items, and the possibility of more in the future, will be repriced again at the end of FY27.
FAR 15.408, Table 15-2 requires prime contractors and higher tiered subcontractors to conduct price
analysis of all subcontractor proposals and a cost analysis of each subcontractor proposal for which
certified cost or pricing data is required. Fair and reasonable subcontractor analysis in accordance with
FAR 15.404-3(b) Subcontract Pricing Considerations shall accompany proposal submission.
An un-sanitized cost breakdown (all cost information, rates/dollars) shall also be provided in a Microsoft
Excel File.
In support of the proposed Indirect Expense Rates, Inter-Organizational Transfers (IOTs) and its
subcontractor(s) shall provide documentation of the most recent Indirect Expense Rates, to include, at
least one of the following:
 Forward Pricing Rate Agreements (FPRAs) with DCAA or DCMA.
 Forward Pricing Rate Recommendations (FPRR) from DCAA or DCMA.
 Forward Pricing Rate Proposal (FPRP), Approved Provisional Rates Proposal or other statement
of current rates including three (3) years of Incurred Cost Submissions to DCAA detailing pools
and bases (by expense accounts) information which validates the calculations or Three (3) years
historical actual detailing pools and bases (by expense accounts) information which validates the
calculations.
Note: The rates reflected in the FPRA, FPRR, FPRP, Approved Provisional Rates Proposal or other
statement of current rates shall directly match the proposed rates as detailed in the proposal. If the rates do not match, the offeror shall provide sufficient detail explaining how the proposed rates are realistic.
Identify key business unit personnel related to contracting, technical and pricing questions and known
DCMA or DCAA business unit points of contact (POCs) to expedite the question/review process.
In accordance with FAR clause 52.215-22, Limitation on Pass-Through Charges, if offeror intends to
subcontract more than 70 percent of the total cost of work to be performed under the resulting add-on,
offeror shall identify in its proposal a description of the value-added provided by offeror as related to the
work to be performed by the subcontractor(s) as defined by FAR clause 52.215-22.
Offeror shall identify and address in its proposal all actual or potential Organizational Conflicts of
Interests (OCIs), per FAR 9.5, or state that there are no known potential OCIs. If any actual or potential
OCIs are identified, then offeror shall submit a mitigation plan.
No assumptions, terms, conditions, caveats or exceptions submitted within offeror proposal, in response
to this RFP, will be accepted or incorporated into the basic contract. All assumptions shall be addressed
and/or resolved through the use of the question-and-answer period.
Offeror shall submit their subcontracting plan with their proposal as a separate document. The subcontract
shall be incorporated by reference and made a part of the final award. The subcontract will be used to
ensure offeror is on track to meet the goals established in the base contract.
Additional Considerations
Containers - The Government did not provide separate Subcontract Line Item Numbers (SLINs) to
accommodate items that may require reusable shipping containers. However, if an item requires a
reusable shipping container, a SLIN may be added to allow the offeror to price the item with a shipping
container. The offeror shall propose the most expeditious delivery schedule for each item.
First Article Test (FAT) may be required, if so, the requirement will be included on the applicable
delivery orders. When required, FAT must be separately priced. The offeror may submit a Request for
FAT Waiver; however, FAT may be included on the award in anticipation of the requirement on future
orders. Upon receipt of the FAT Waiver request, DLA will submit documentation to SRD for evaluation
and technical consideration.
Economic Order Quantities (EOQs) shall be proposed by the contractor to ensure optimal ordering
quantities. The EOQ information requested in this narrative, is being solicited to avoid acquisitions in
disadvantageous quantities and to assist the Government in developing data for current and future
acquisitions of this item/these items. The Government anticipates the offeror’s proposal (in view of
market research, historical awards, the nature of the item(s) being solicited, and the current economic
environment) will include quantities/ranges that will vary from those being solicited. The solicited
quantities are based on estimated annual demands and as such Government reserves the right to award the
most advantageous quantities &/or ranges.
Evaluation Criteria - Minimum technical requirements. To be technically acceptable and thus, eligible for
award, a proposal must conform to ALL solicitation requirements, such as terms and conditions,
representations and certifications, and technical requirements provided within all sections of this
solicitation and/or within its attached addenda. Proposals receiving a technical rating of “Unacceptable”
will be ineligible for award.
Price
In addition to meeting the solicitation’s technical and quantity increment or range
requirements above and cost and pricing requirements below, the Government will evaluate a proposal’s
pricing for reasonableness. Evaluation of a proposal's pricing will not obligate the Government to order
the estimated quantities or to distribute orders in the manner evaluated. The Government may reject a
proposal as “Unacceptable” if its pricing is determined to be materially unbalanced.
Cost and Pricing Data. Offerors must provide all cost or pricing information required by FAR
15.4. Failure of a proposal to provide cost or pricing information required by FAR 15.4 will result in said
proposal being deemed Unacceptable, and thus, ineligible for award.
PDQR - The Product Quality Deficiency Report Program (Army Regulation 702-7) will be used when
contractors: 1) deliver deficient items or 2) receive deficient items from a DoD supply chain in support of
Army requirements. When requested, the Contractor shall assist the cognizant Contract Administration
Office in evaluating PQDRs and exhibits for defects reported on items manufactured under this contract
to determine the root cause for deficiencies. Corrective action and Preventative Action to preclude
recurrence of discrepancies shall be an integral part of the Contractor’s Quality Program. These defects
may be reported from any DoD activity that discovers a defective item.
Ranges - Offerors are requested for increments or ranges of quantities as listed in the attachment. The
awarded quantity, or quantities in the case of multiple items, will be based on the requirements of the
Government and the combination of price and quantity per item that is the most advantageous to the
Government. Quantity increments shall consist of a primary amount and alternate amounts based on
incremental increases. The quantity awarded will be either the full primary, or one of the alternate
quantities. Quantity ranges consist of a specific series of ranges. The quantity awarded may fall anywhere
within range. If this is a request for quote (RFQ) or a request for proposal (RFP), an offer that only
contains prices for quantities other than those quantities indicated in the schedule of supplies or services
may be precluded from consideration for award if the contracting officer elects to make an award without
discussion of proposals.
The contract quantity range shall be determined by the total quantity at the time of delivery
awarded. There shall be no downward adjustment to an already awarded delivery order regardless of if
another delivery order is awarded in the same ordering period. For example, one delivery order quantity
may not be combined with any other delivery order quantity to create a price break, even if the new
delivery order is placed in the same ordering period. Each order stands on its own. In the event an order
is issued for quantities outside the ranges established in the contract, the unit price associated with the
highest list range will apply to that order. The contractor has the right to accept or reject any quantity
outside the ranges established in the contract and adjust the production lead time / monthly delivery rate
as appropriate.
Ozone Depleting Substances – Item(s) being procured have been identified as having Ozone Depleting
Substances and High Global Warming Potential Hydrofluorocarbons (OHM) specifications.
(a) In accordance with Section 326 of P.L. 102-484, the Government is prohibited from awarding any
contract which includes a specification or standard that requires the use of a Class I ozone-depleting
substance (ODS) identified in Section 602(a) of the Clean Air Act, (42 U.S.C. 767a(1), or that can be met
only through the use of such a substance unless such use has been approved, on an individual basis, by a
senior acquisition official who determines that there is no suitable substitute available.
(b) To comply with this statute, the Government has conducted a best effort screening of the
specifications and standards associated with this acquisition to determine whether they contain any ODS
requirements. To the extent that ODS requirements were revealed by this review they are identified below
with the disposition determined in each case.
(c) If offerors possess any special knowledge about any other ODSs required directly or indirectly at
any level of contract performance, the U.S. Army would appreciate if such information was surfaced to
the Contracting Officer for appropriate action. To preclude delay to the procurement, offerors should
provide any information as soon as possible after release of the solicitation and prior to the submission of
offers to the extent practicable. It should be understood that there is no obligation on offerors to comply
with this request and that no compensation can be provided for doing so.
Export Control – Arms Export control is applicable. The technical data package contains technical data
whose export is restricted by the Arm Export Control Act (Title 22 U.S.C., SEC 2751 ET SEQ.) or
Executive Order 12470. Violation of these export laws are subject to severe criminal penalties. Export
Control requires the applicable certifications to be current for both the quoter and manufacturer. The
offeror and any source(s) of supply it will use for contract performance must have an active United
States/Canada Joint Certification Program (JCP) certification to access export-controlled data. DLA does
not intend to delay award in order for an ineligible offer or its source(s) supply to apply for and receive
authority approval to access the export-controlled data.
Packaging – Standard practice for military packaging shall be utilized (MIL-STD-2073-1).
Delivery Schedule – Proposal shall include proposed production lead time and monthly delivery rate.
Proposal Submission – Proposal shall be electronically submitted to Government. Offeror can contact
contract team for a DOD Safe Site link for submission purposes.
CLINS - NSNs listed on this effort may be awarded together or separately.
Provisions
252.227-7017 Identification and Assertion of Use, Release, or Disclosure Restrictions
52.204-8 Annual Representations and Certifications.
52.223-4701 Ozone Depleting Substance
DLAD 52.233-9001 Disputes – Agreement to Use Alternative Dispute Resolution (ADR) .
Timelines
Solicitation Receipt – Request offeror acknowledge receipt of solicitation SPRRA224R0016 within 3
business days and feedback on feasibility in meeting the closing date of 4PM CST 29 April 2024
referenced in solicitation submittal email and SAM.GOV posting. If offeror elects to "No Bid", please
provide detailed rationale and an alternate source of supply.

Proposal Receipt - Upon receipt of proposal, DLA Contracting Team shall acknowledge receipt. Within 3
business days, the Government will identify deficiencies, request additional information/documentation,
and/or provide proposal acceptance. Offeror proposal shall remain valid for a minimum of one hundred
and eighty (180) days from the date of acceptance.
Summary
All communications SHALL be submitted in writing ONLY AND directly to the following DLA
Contract Team Members.
Becky Brady, DLA Aviation-Huntsville
Contracting Officer, Strategic Missile Team
E: Becky.Brady@dla.mil

David Bennett, DLA Aviation- Huntsville
Contract Specialist
E: David.B.Bennett@dla.mil
Offeror shall not contact any other Government personnel other than the person(s) identified above.
Contacting any Government personnel other than the individual(s) identified above could result in an
organizational conflict of interest (OCI).
Be advised that this requirement shall be advertised in the SAM.gov website for viewing by the general
public. In the event another supplier indicates interest in responding to the requirement as a result of
viewing the synopsis, a formal solicitation will be issued to accommodate that supplier.
Please direct inquires, requests for clarification, and status updates to David Bennett
(David.B.Bennett@dla.mil).

Attachments:
SPRRA224R0016 Attachment 021524 (full list of parts)
FAT Waiver Worksheet REV E 031220
CNT TDPL

Opportunity closing date

26 September 2024

Value of contract

to be confirmed