Poland - Medical supplies

Description

Performing for the needs of the Municipal Hospital in Siemianowice Śląskie Sp. z o.o. supplies of small medical equipment for single use" divided into 86 packages.The offered product must meet all the rules and procedures for the admission of medical devices to trading, taking into account, in particular, the requirements of quality, effectiveness and safety of their use in accordance with:Act on Medical Devices of 20 May 2010. (i.e. Journal of Laws of 2017, item 211, as amended), Regulation of the Minister of Health on the manner of making notifications and notifications concerning the products of 17 February 2016. (Journal of Laws of 2016, item 210),Regulation of the Minister of Health of 5 November 2010 on classification of medical devices. (Journal of Laws 2010, No. 215 item 1416), Regulation of the Minister of Health of 23 September 2010 on CE design (Journal of Laws 2010, No. 186 item 1252), Regulation of the Minister of Health on the essential requirements and conformity procedures for medical devices
Item Equipment name a.m. Demand Wednesday/year1 Non-voltage tape for the treatment of urinary blockage - sterile, in a polyethylene casing - tape ended with loops for fixing to the guides - length of the tape 45cm +/- 3 packed a'1 pcs,- thickness approx. 0.53mm +/- 3 basis weight 65 g/m2 - 80 g/m2 - completely non-absorbent - universal, because it is designed for both TVT and TOT implantation methods pcs. 302 Reusable guide bar. Set - right and left. Material steel / aluminium. Total length - min. 200mm, handle length - up to 127mm +/- 3. Autoclavable, for steam sterilization. Needles (guides) type - Helical Left and Right. pcs. 2 Item Equipment name I.m. Required diameter/year1 THREAD RETRIEVER type thread hook - teeth every 10 mm and a protective ball of 4 mm diameter. Sterile, ready to use, single packed. pcs. 1002 Finger-piercing membrane punching hook - safe tool for selective amniotomy. sterile - ready to use pcs. 1003 Balloon to reduce postpartum bleeding - double light balloon - liquid - external balloon, air - internal balloon. It is possible to adjust the position of the catheter if it is placed in the wrong place. pcs. 1 Item Equipment name I.m. Required Wednesday/year1 Neonatal kit for resuscitation, T-system, disposable, mask size 0/1, connector 15mm/10mm pcs. 1002 Neonatal kit for resuscitation, T-system ovens, disposable, without mask, connector 15mm/10mm pcs. 100 1 Disposable breathing system with AutoBreath, consisting of a 1m long, 10mm diameter corrugated tube, integrated with a pressure-regulated exhalation valve, supplied with a 95cm long drain; system compatible with Resuscitaire. Op.=25 pcs Op.1 1 Sterile single-piece sensor, latex-free, without DEHP, self-adhesive for infants from 3 kg to 20 kg in the "L" shape, length: 1m, diameter: 10 mm, integrated in a pressure-regulated exhalation valve, supplied with a 95 cm long drain; compatible with Resuscitaire device. Cable min 90cm (without plug and slice), with integrated single rectangular mounting slice and six wheeled stickers coated with adhesive on both sides for easy application of the sensor and extended lifetime, sensor in OxiMAX technology - identity with Oximax confirmed by a certificate or statement from the original manufacturer of Oximax technology (certificate / statement to be included in the offer), digitally and analogically calibrated ensuring accuracy (%SpO2) in the range of 70 - 100 % - 2 digits, in the range of 60 - 80 % - 3 digits - accuracy for both ranges of SPO2 confirmed in the registration documents or in the operating manuals of the offered sensors - required inclusion in the offer). Correct sensor identification by pulse oximetry with name display function by displaying the part number of the connected sensor according to the part number on the sensor packaging. Confirmed in the registration documents or in the operating instructions of the offered sensors - confirmation required to be included in the offer). Sensor photodetector protected by a copper Faraday shield to reduce electromagnetic interference. Package of 24 pieces. With a minimum of 6 pieces of sterile adhesive discs for gluing the sensor to extend its life in one integral sensor package. 1 piece required. Samples. op. 1 Item Equipment name a.m. Required meter/year1 External strips for the meter.Parameters of the meter - calibrated to plasma, strips containing glucose oxidase enzymes - presentation of the result in mmol/l and alternatively mg/dl - storage temperature of the strips - from 4 to 40oC - automatic coding of the meter - no auto code on the display - suction capillary on top of the test strip - haematocrit range from 30 to 55 % - part of the test strip outside with automatic ejection after measurement - measuring range ≤ 20 mg/l: ≤ 600 mg/l - 3 different measuring ranges (normal, low and high)- 6 months valid for the test strips after opening - min. 5 months - free of charge control fluid in a set with a gynecometer - certificate of verification ISO 15197:2015 - instructions in Polish - glucose meter and strips - the offered glucose meter strips are a medical device reimbursed - it is possible to use test strips up to 3 types of glucose meters, which were reported to the Office for Registration of Medical Products or a notification was sent to URPM. Op. 5002 Disposable lancets (compatible with lancet lancets supplied with the Glucometer) - Op. = 200 pieces. Op. 203 Strap for determining blood glucose levels in newborns - Op. = 50 strips. In the form of a loan for the duration of the contract - 2 glucose meters. Op. 10 Item Equipment name I.m. Requirement Wednesday/year1 Mitshubishi ultrasound paper - type K61B - original Rol. 2002 KTG paper - for Bistos 350 compilation Skł. 1003 KTG paper HP Philips M1911A folding 150x100x150 Glass 300 Item Equipment name I.e. Required meals/year Disposable plastic dishes for hot meals1 Flat plate Ø 23 cm ± 2 cm pcs. 35 0002 Flapper 500 ml capacity pcs. 50 0003 Disposable spoons large pcs. 7 0004 Disposable forks pcs. 7 0005 Disposable knife pcs. 3 0006 Rectangular paper plate 17cm x 24cm pcs. 50 000 Items Equipment name a.m. Required diameter/year1 Disposable, foil or non-woven fabric, shoe protector, high with rubber band pcs. 30002 Disposable backing, size 210x160 cm, made of three-layer polypropylene non-woven fabric, gram 35g/m2, blue colour, package A20, each backing individually folded. pcs. 400 1 Polypropylene flat mesh 8 x 12 pcs. 50 1 Disposable razor (single blade. Disposable product. pcs. 3000 1 Operating film "JOBAN" 56 x 45 cmSurgical film, sterile, self-adhesive with hypoallergenic, acrylic adhesive, With protective paper, having a bactericidal substance in the form of active iodophor, placed in the adhesive layer, with a total dimension of 66 x 45 cm (+/- 10%) (size of the adhesive part 56 x 45 cm (+/- 10%).Requires Class III for medical device. pcs. 400 1 Needle holderA 2L pcs. 2000B 5L pcs. 1000 1 OGARIT suction filter pcs. 50 1 Filter for MEDELA mammals pcs. 100 Items Equipment name a.m. Required diameter/year1 Disposable cups - (200/250ml) pcs. 120002 Bags for corpses - closed with a zipper pcs. 5003 Disposable glasses pcs. 40000 Items Equipment name a.m. Required diameter/year1 Wooden sticks, length from 20 cm to 30 cm, packed in 100 pieces each. Op. 502 Wooden spatulas op. 100 pcs. Op. 10 1 Kramer rail 10 cm/150 cm pcs. 1002 Kramer rail 7 cm/150 cm pcs. 503 Aluminium finger rail pcs. 200 1 Barren lumbar puncture kit Minimum order quantity: - Foiled napkin with 45 x 75cm absorbent layer - 1 pc- Foiled napkin with 50 x 60cm absorbent layer with Ø 10cm hole - 1 pc.- Non-woven compresses 30g/m 4W 7,5x7,5cm - 10 pcs - 3ml syringe - 1 pcs - 5ml syringe - 1 pcs - 0,5x40mm syringe needle - 1 pcs - 1,2x40mm syringe needle - 1 pcs.- Island slice with a dressing 5x7.2cm - 1 cmStep rigid, transparent unit pack with an external tricorder label in Polish containing full product and composition identification (TAG type) with two self-adhesive elements for gluing to hospital documentation. set 400 1 Dental pouches - one-piece, tempering, transparent, size up to 70mm pcs. 300 1 Disposable liquid hand wash brushes - soaked in chlorhexidine pcs. 4000 1 Non-absorbent disposable primer - keeping skin dry, not wrinkling or delaminating. Non-sterile, full-barrier, breathable (WVTR min. 3600 g/m2/24h) protective primer. Middle layer with gel insert remaining dry on the surface after absorbing liquids, with sealing margins made of laminate on each side of the absorbing part, absorbency - according to the size of the primer.A Sizes: 45 x 61cm (Size +/- 10%), absorbency 900-1150g pcs. 1000B Sizes: 61 x 91cm (Size +/- 10 %), absorbency 1800-2300 g pcs. 1500C Sizes: 25 x 40 (Size +/- 10 %), absorbency 200-300g, pcs. 500 1 Surgical, cordless, waterproof, with fixed head, with the possibility of disinfection by full immersion in disinfectant (protection class IPX7). With one LED to indicate correct charging. Quiet - max. 65 db with universal blade. Clipper available with at least 3 different types of compatible disposable blades. Clippers equipped with inductive charger. 52 Disposable universal blade, for surgical razor with fixed blade, microbiologically clean. Cutting blade width 31mm - 31,5mm, blade design excludes any skin damage - the cutting blade is on top and has no contact with the patient's skin, designed for removing all types of hair, biologically clean, packed: 1pc/blister, LOT number on each blade pcs. 800 1 Intestinal feeding probe with 8F guide bar pcs. 102 Neonatal feeding probe ch 6/51 without guide, polythene pcs. 203 Flocare G/B enteral feeding device for gravitational feeding in a bottle version, DEHP free pcs. 504 Flocare G/P gastrointestinal feeding device for gravitational feeding in a PACK version, DEHP free pcs. 6505 Flocare P/B gastrointestinal feeding device for pumps, bottle type DEHP free - FLOCARE 800 NUTRICIA pcs. 1006 Flocare P/P enteral feeding device in pump version, PACK type DEHP free - FLOCARE 800 NUTRICIA type pcs. 350A Flocare PEG SET - set for endoscopic skin gastronomy in size1 Ch 16/76 cm or CH 14/40 with ENFit tip pcs. 102 Ch 20/76 cm or CH 18/40 with ENFit tip pcs. 20B Polyurethane (PUR) Intestinal Flocare Split, made of polyurethane, with a blue line contrasting in X-rays, with a guide in size1 Ch 10/110 cm pcs. 102 Intraoperative Gastostomy catheter made of silicone, three-way, packed with sterile Ch 18 slip gel. 15 1 Abdominal drain F 28/ 400 pcs. 5002 Abdominal drain F 30/400 pcs. 200 1 Urethral catheter size 4-10 pcs. 500 A Gastrointestinal tray from 80 cm to 120 cm1 14 pcs. 6002 16 pcs. 6003 18 pcs. 6004 20 pcs. 1005 28 pcs. 106 30 pcs. 107 36 pcs. 20B Stomach indenter - 150 cm1 16 F pcs. 2002 18 F pcs. 2003 20 F pcs. 200 1 Set for an anterior rectal resection containing a circular stapler 25/26 or 29 in diameter and a straight stapler 30mm, 45mm or 60mm in size to close the rectal stump. Disposable circular stapler curved with controlled tissue pressure and adjustable staple closure height from 1.0mm to 2.5mm, stapler sizes: 25, 29, height of open staple 5/5.5mm, which allows the operator to close the staple to the full height from 1.0mm to 2.5mm, ergonomic stapler handle covered with non-slip rubber coating, the Orderer will determine the size of the stapler each time he places an order.Straight stapler - closing size 30mm, 45mm or 60mm, containing a load for standard tissue (closing height of staple 1.5mm) or thick (closing height of staple 2.00mm), a staple with a round section. The orderer will specify the type of load in the stapler each time he places an order. pcs. 30 1 Fingerprint Pulse oximeterDisplay - type OLEDSpO2 0 - 100 %RR 0 - 250 BPMPower supply: Batteries - AAA alkaline, 1.5VWeight: approx. 50 g to 80g without batteryWork temperature: 5 - 40oC pcs. 20 Amber syringesDescription; Sterile three-piece syringe with luer-lock tip, amber, for supply of photosensitive drugs, capacity 50-60 ml, piston and cylinder made of polypropylene, latex-free, PVC, DEHP, compatible with cytostatic drugs (intended for safe administration and preparation of cytostatic drugs - confirmed by manufacturer's declaration), black unbreakable scale every 1ml, nominal scale distinguished graphically (circumference, surrounded by a circle of the number indicating the number of nominal volume), scale outside the nominal scale every 1 ml1 Infusion pump syringe 50-60ml pcs. 2000 Extender for light-sensitive infusion pumpsDescription: Disposable, sterile, nonpyrogenic, non-toxic. Extensions for infusion pumps include the following components: - luer-lock connector casing, - luer-lock 'male' conical connector, - PVC drain with an inside diameter of 1.24 mm, - luer-lock 'female' conical connector, - luer-lock connector casing. Compatible with syringesPre-extensions for infusion pumps: - sterilised EO, - blister-pack, - length 1.5m2 Extension cable for infusion pumps for photosensitive drugs pcs. 1500Device for transfusion of photosensitive infusion fluidsDescription: disposable, sterile, nonpyrogenic, non-toxic. The infusion apparatus consists of the following components: - recipient needle casing, - two channel recipient needle, - hydrophobic air filter (optional), - drip chamber 20 drops = 1ml ± 0.1ml- 15 μm mesh fluid filter, - crimper roller, - crimper roller, - additional injection connector (optional), - 150 cm long medical drain, - luer-lock conical connector, - luer-lock connector casing. Phthalone-freeThe devices for transfusion of infusion fluids are: - sterilized EO - blister-pack3 Infusion fluid transfusion device light sensitive pcs. 100004 Photosensitive drug protection bag.Size: 100-250ml pcs. 100Size: 500-1000ml pcs. 100Size: 3000ml pcs. 100 Disposable bag inserts, soft with permanently attached round cover in the cover 4 ports (suction, patient accessories, tandem) suction port protected with mechanical valve and double anti-bacterial filter, patient port protected with anti-return valve (or equivalent solution), cover equipped with wide collar acting as a handle, sealing cover with a clear click, on the cover at least the expiration date, or the date of manufacture and batch number, the possibility of inserting the cartridges in larger canisters or / or bag inserts matching the canister of the same volume Gelding powder is contained in a disposable bag insert1 j.w., capacity 1.0l pcs. 3202 IU, capacity 1.5l/2.0l pcs. 10003 units w., capacity 3 l pcs. 500 Disposable polycarbonate canisters, suitable for disinfection, equipped with an integrated handle with a suction shut-off valve, scaled every 50 ml / or 100 ml.1 IU, capacity 1.0l pcs. 52 IUU, 1.5l/2.0l pcs. 103 units w.w., 3 l units 104 Mounting on Modura rail. pcs. 40 Description Soft tissue biopsy needle with adjustable cutting length 12 or 25 mm (e.g. VELOX 2)1 VT 14 120 - 00 or 14G length 15cm pcs. 102 VT 14 180 - 00 or 14G length 20cm pcs. 103 VT 16 120 - 00 or 16G length 15cm pcs. 104 VT 16 180 - 00 or 16G length 20cm pcs. 10 DESCRIPTION OF THE needle for thin needle biopsy Ø 20 according to GAUGA1 WESTCOTT type 180 mm needles pcs. 62 WESTCOTT type needles 120 mm pcs. 63 CHIBA-type needles 180 mm pcs. 64 CHIBA Needles 120 mm pcs. 6 Cobweb NeedleNr 27 G - Standard (Quincke) Type with Guide Bar pcs. 500Ineedles for subarachnoid anesthesia Pencil Point type with guide, thin-walled, fast-flowing, with transparent grooved tip, with matching guide, color-coded for size identification, sterileNr 27 G P-P - 88mm long needle and longer (130) pcs. 500 1 Set for retransfusion of full blood after closing the operating field without destroying morphotic elements. The set should allow the active drainage to pass automatically to passive without disconnecting the system and have two levels of blood filtration, the first at bag level up to 175 micrometers and the second cascade in a 175/40/10 micrometer blood transfusion line (allowing free passage of erythrocytes). The set should additionally have a blood vessel up to 1 000 ml graduated, a bellows up to 200 ml, both with a non-return valve system and an additional drainage bag with a non-return valve, without a filter up to 1 000 ml, and a Y-type connector with cut connections for the drains. The blood transfusion line should additionally have a roller clamp for flow control and a blood bag compatible termination. The system should allow for the drainage of blood from one or two drains and have the appropriate quality certificates. Two drains with trocar-type variable hole diameter in sizes from 12 to 18 CH (to be selected according to the order). Sterile dressing for stabilization of percutaneous catheters with hydrocolloid layer and foam for catheter support and protection against refraction (maintenance time up to 7 days), sizes:- for catheters in sizes 5Ch-14Ch- for catheters in sizes 12Ch-22Ch. pcs. 252 Closed low-pressure system for wound drainage consisting of 300 ml hemispheric chamber, 600 ml bag with hydrophobic filter, non-return valves at chamber inlet and outlet, drain length min. 1050mm, universal drain connector with diameter CH 10-18. pcs. 25 1 Tracheotomy tube with one cuffThermo-sensitive PVC tracheotomy tube, with low-pressure sealing cuff, smooth and soft transparent sign wings, guide, anatomically shaped, 2 fixing tapes, control balloon marked with tube or wing size, latex-free, phthalate-free, sterile, in sizes: 6 to 10 every half. pcs. 452 Tracheotomy Tube shim and "artificial nose" heat and moisture exchanger A Tracheotomy tube shim covered with an aluminium layer with a diameter of 12-19mm (CH 31-50), size - 8x9 cm. pcs. 50B Artificial nose" heat and moisture exchanger for tracheotomy tubes, with single-membrane foam insert, oxygen port with conical tip, with 15 mm diameter self-closing suction port, humidifying efficiency 24 mg H2O at Vt 500ml, moisture loss 13.5 mg H2O at Vt 500 ml, dead space 16 ml, flow resistance 0.2 cm H20 at 60 l/min, designed from tidal volume Vt 60 ml (maximum tidal volume Vt 1000 ml), weight 6 g, biologically clean. Pcs. 2003 Reinforced intubation tubeMedical PVC reinforced intubation tube, DEHP-free, latex-free, preformed, with a high volume - low pressure cylinder-shaped cuff, with one intubation depth marker above the cuff for sizes up to 5.5; two markers from size 6.0; tube size designation on the body, on the ISO 15 mm connector and on the control balloon with cuff diameter from size 5.0; atraumatic, the end of the tube rounded, curved towards the inside of the tube and profiled in the shape of a buffalo nose, an X-ray line from the end of the spiral to the end of the tube, a tube scaled on one side every 1 cm, with a Murphy hole, a drain and a control balloon in a colour other than the tube body, a reduced low-profile control balloon for tube sizes from 3.0 to 4.5; ISO 15 mm connector colour coded for optimal selection of the suction catheter size according to EN ISO 8836:2014-12, sterile, for intubation through the mouth and nose, in sizes from 3.0 to 9.5 every half, metal spiral completely embedded in the wall of the tube along its entire length, paper packaging - foil pcs. 204 Sengstaken's probeSengstaken's probe for stopping hemorrhages after varicose veins breakage, sterile, triple-lumen, made of rubber, length 120cm, available in sizes: 15 CH, 18 CH and 21 CH, individually packed in a double package, i.e. internal foil sack and external foil-paper package. 155 Oxygen maskA Oxygen mask for medium oxygen concentration, open, elongated under the chin, anatomical shape, made of soft PVC, with aluminium nose clamp, elastic for fastening with length adjustment, atraumatic mask cuff, rotating connector, oxygen drain 2.1m =/- 10 % long, star-shaped, universal connector for connecting apparatus requiring a standard connector or threaded connector, a.s, microbiologically pure, latex, phthalate, DEHP, bisphenol (BPA) free, single packed. On the unit packaging: name, graphics of the product with description, catalogue no., manufacturer, expiry date, series no., symbol "disposable". (digit 2 crossed out), CE symbol. pcs. 300B Oxygen-feeding mask type Venturi, open, elongated under the chin, made of soft PVC, with aluminium nose clamp, length-adjustable rubber band, 7 nozzles for low and medium oxygen concentration, colour-coded (24 %, 28 %, 31 %, 35 %, 40 %, 50 %, 60 %), included adapter for connecting a high-performance humidifier, with a ring to ensure continuous flow, dead space of up to 10 cm (with a ring to ensure continuous flow). 15 cm, drain length 2,1m +/- 10 % and asterisk section ended with a universal connector for connecting apparatus requiring a standard or threaded connector, free of latex, phthalates, DEHP, bisphenol, IU, individually packaged. Package 1 Universal Airway Adapter with rotating port to connect the breathing circuit, with rotating port to connect to the intubation/tracheostomy tube, with a 7-day use option confirmed in the Instructions for Use, with an access port in the axis of the adapter and the tubing that allows for suction in a closed system without disconnecting the breathing circuit and without disconnecting the adapter from the intubation/tracheostomy tube, open, performed bronchoscopy procedure, mini-Bal, branched at 45 degrees, with one-way luer port for catheter flushing, also allowing the administration of the drug, with silicone, maintenance-free, self-sealing, bipartite valve completely separating the flushing chamber from the patient's airways. pcs. 3002 Catheter for suction in the closed system for 72 hours for 54 cm long intubation tubes, for 34 cm long tracheotomy tubes, scaled every 1 cm, size coded in colour and number on the catheter, with one central and two side openings, with a vacuum block equipped with a tether plug, DEHP-free in size: 10; 12; 14 and 16 Fr, compatible with airway adaptor from item 1. 3003 Closed-loop suction catheter for 72 hours, 31 cm long, catheter scaled every 1 cm, size coded in colour and numerically on the catheter, with one central opening and 2 side openings arranged alternately, with a catheter flushing port, with a vacuum block equipped with an earthed stopper, devoid of DEHP, in sizes: 10; 12; 14 and 16 Fr, compatible with an airway adapter from item 1: 5; 6; 7 and 8 Fr, compatible with airway adaptor from item 4. pcs. 504 45-degree angular airway adapter, can be used for 7 days, with a centering system for the insertion of a suction catheter, additional sealing ring, rotatable at the endotracheal tube, 5 connectors for endotracheal tubes included, adapter with a transparent flushing chamber, silicone, maintenance-free, self-sealing, bipartite valve, compatible with the catheter from item 3. pcs. 505 Non-sterile set for drains, consisting of a Y-joint (in one plane) with one female (funnel) two male ends, and a suction valve with non-contact suction control, allowing the drains to branch out on the suction side. Pcs. 2006 Connecting drain, reinforced over the entire length of the drain, ensuring non-suction, 210 cm long, 5.6 inside diameter; 8.0 outside diameter; drain end on both sides of the funnel, sterile, double-packed in a perforated foil bag and outer foil-paper packaging. Pcs. 4007 Suction tube 210 cm long, with 8 mm female and 5,6 mm male end with sealing cap, single packed, sterile, double packed in a perforated plastic bag and outer packaging film-paper. Pcs. 200 1 Disposable system for the controlled collection of loose stool with: silicon sleeve 167 cm long, retention balloon with pocket to place the leading finger, filling port for the retention balloon. Clinically tested system (safety assessment up to 29 days), maintenance time up to 29 days, biologically clean. Stool collection bags included. Pcs. 202 Interchangeable bags compatible with the controlled stool collection kit. pcs. 403 Hourly diuresis measurement kit, sterile. Two-lumen connecting tube 150 cm, foley catheter connector equipped with a flat, easy-to-disinfect needleless sampling port with a transparent viewing window for urine and sampling and a tiltable anti-return valve, at the entrance to the chamber the tube protected by an anti-voltage spiral for min. 5 cm, 500 ml measuring chamber, fitted with a built-in, unbreakable hydrophobic filter, cylindrical precision measuring chamber graduated linearly from 1 to 40 ml in 1 ml increments, with digital markings in 5 ml increments, 40 to 90 ml in 5 ml increments and 90 to 500 ml in 10 ml increments. The chamber is emptied by turning the valve 90 degrees without manoeuvring the chamber, a non-replaceable 2000 ml urine bag connected at the factory, with stabilising and anti-intentional release clamps, with a hydrophobic filter, anti-return valve and a T-type faucet suspended upwards in an open overlap. Scaled bag every 100 ml from 25 ml. Possibility of suspending the set in at least 3 independent ways. Pcs. 1004 Closed system for non-invasive intra-abdominal pressure measurement by manometric method (factory-connected hourly urine collection set with measuring line, sterile, in one package to keep the system closed), 20 ml manometric drain equipped with biological filter, placed between the foley catheter and hourly urine collection set, ensuring proper ventilation. A non-return valve built into the connector prevents the urine from going back from the hourly urine collection set to the measuring line. Integrated drain clamp for pressure equalization and precise reading of intra-abdominal pressure, needleless sampling port, measuring line calibrated in mm Hg, use time up to 7 days. Pcs. 55 Foley catheter made of 100 % silicone with anti-infection coating on the inside and outside (Au, Pd, Ag) and hydrogel on the outside, two-way clinically proven reduction of catheter infection, for use before 90 days. Sizes 6CH to 26CH, balloon 5/10/30 ml depending on catheter size, length 40 cm (+/- 1 cm) Pcs. 30 1 Tracheotomy tubing bands, with VELCRO type laminated Velcro, made of non-irritating material, adjustable in length, sterile, IU, for children and adults. Pcs. 2002 Naso-fix stabilizing patch, for catheters inserted through the nose or into the nose, with hypoallergenic glue, size M/L (8 cm x 8.7 cm) or M/S (7.5 cm /7.6 cm), 100 pieces. Pcs. 2003 One-piece TuBo-Clip S-type intubation tube fixer used to fix extracorporeal breathing in adults, adolescents and teenagers by securing the mouth or nasal passages. The fixation is secured directly on the tube with Velcro tape. Skin-friendly, glue- and latex-free, anti-allergic Pcs. 2004 Eyelid stabiliser for mechanically ventilated patient, corneal protector, made of material permeable to air and keeping moisture, adhesive layer based on medical adhesive, hypoallergenic. Oval shape of 5.5 x 3.5 cm, with yellow leaf for easy insertion and removal. The product is biologically clean, 1 pair of stabilisers in the package. Collective packaging 100 pairs of pcs. 2005 Absorbent towels, two-layer, roll 107m, 450 single elements, roll diameter 195 mm, width 21 cm, length 23,5 cm, weight 37gr/m2, food-grade, non-sterile. Roll. 106 Cap for washing the patient's head, not requiring additional soaking of the head, without rinsing, with a two-layer cap structure: an outer foil made of polyethylene and an inner layer of moistened absorption layer of 160 g/m2, containing: min. 150g (+/- 10g) of a solution with water, simetikon, components preventing static electricity, latex-free, in a package ensuring the possibility of heating in a microwave oven. Instructions for use in Polish on the unit packaging. Product registered as a medical device. Pcs. 200 1 Safe intravenous infusion cannula made of polyurethane with published clinical trials for biocompatibility of polyurethane, with self-closing side port plug, with anti-return valve preventing blood flow back when inserted, equipped with an automatic clip with a construction protecting the needle against stabbing and with capillaries preventing blood splatter, min. 5 x-ray strips embedded along the entire length of the cannula. Packed in rigid blister and Tyvec packaging without cellulose to prevent accidental bursting and loss of sterility, free of latex and PVC. Sizes: 0.9 x 25 mm with a minimum flow of 42 ml/min 1.1 x 32 mm with a minimum flow of 67 ml/min 1.3 x 32 mm with a minimum flow of 103 ml/ min 1.3 x 45 mm with a minimum flow of 103 ml/ min 1.5 x 45 mm with a minimum flow of 133 ml/ min 1.8 x 45 mm with a minimum flow of 236 ml/ min 2.0 x 45 mm with a minimum flow of 270 ml/ min Pcs. 3500(500 pieces of each size)2 Disposable stack made of a wide and stretchable strip of synthetic rubber, latex-free, phthalate-free, blue in colour, trade name of the product on a single piece, packaging allowing convenient dividing of perforated bands 45 cm long, stack width 2.5 cm, packaging: 1 roll (25 pieces), expiry date 3 years from the date of production. op. 1203 Arterial cannula 20 G 1.1 x 45 mm, flow 49 ml/min, PTFE catheter, with a red Floswitch type slider-ball valve, with wings with holes for sewing to the patient's skin, sterile, disposable, packed in TYVEK, opk./25 pcs. with a fastening system with a window made of PU vapour-permeable foil (MVTR - min. 1500g/24h), with a 10 mm x 15 mm Floswitch valve cut-out, with 3 strips for line guidance. 5004 Multi-access system consisting of six connectors, enabling connection of at least 6 drains. System with a connecting drain. Connectors arranged on the ramp in parallel and symmetrically, three connectors on each side. Each connector is equipped with a non-return valve to prevent reverse flow and mixing of liquids. Length of the whole system maximum 18 cm, filling volume 1.1 ml. Ramp end adapted to LUER LOCK tips, on one side rotary tip with a minimum dead space of maximum 0.03ml. When disconnecting the syringe, pressure pump neutral pressure, no blood suction effect. Duration of use no longer than 7 days, or 100 activations depending on what happens first. Pcs. 205 Injection needles with anti-pincture protection after use in the form of a plastic casing activated by thumb pressure, providing a tight connection to the syringe, one-piece arm, in the colour identifying the size of the needle according to the colour code, with the blade orientated towards the protective casing, which allows for small angle injections and does not obstruct the injection site, sterilisation 1 Set for a 24-hour oral toilet for 3 procedures with composition:- 1 Yankauer type catheter with casing and silicone tip with a working length of at least 14 cm after sliding the casing down, universal suction handle with slide adjustment of the suction force, 1 Y-joint for the suction system bent at a right angle - 2 separate packages each containing: 1 toothbrushZ with suction holes, with manual suction force adjustment valve and sponge on top, min. 7 ml non-alcoholic mouthwash with 0.05 % cetylpyridine chloride solution or 0.12 % chlorhexidine digluconate solution or 1.5 % hydrogen peroxide solution in an extruded sachet, 1 sachet with min. 2 g of water-based mouth moisturizer and 1 sponge applicator - 1 separate package containing: 1 sponge with suction, with suction holes, with manual valve to adjust suction power and with bent tip, min. 7 ml non-alcoholic mouthwash with 0.05 % cetylpyridine chloride solution or 0.12 % chlorhexidine digluconate solution or 1.5 % hydrogen peroxide solution in an extruded sachet, 1 sachet with min. 2 g water-based moisturizer and 1 sponge applicator. Each single package simultaneously functions as a liquid container and allows the preparation of the working solution before opening the package. Offered set with clinically proven effectiveness in reducing VAP. The set has a yankauer holder, allows you to hang on a plastic hanger and includes a numbering that suggests the order of use of single peeled packs. The set is registered as a Class IIa medical device. 2002 Kit for oral toilet containing in one original package: 1 toothbrush with suction valve for adjusting suction power, with suction holes and a sponge on the upper surface, min. 7 ml mouthwash with 0,12 % chlorhexidine digluconate solution or 0,05 % cetylpyridine chloride solution or 1,5 % hydrogen peroxide solution in an extruded sachet, 1 sponge-applicator with corrugation. Each single package of the set also functions as a liquid container and allows the preparation of the working solution before opening the package. Offered set as an element of components for round-the-clock oral toilet with clinically proven effectiveness in VAP reduction. Registered as a Class IIa medical device pcs. 3003 Oral toilet kit containing in one original package: 2 corrugated sponges, with suction, with suction holes, with bent tip and with manual valve to adjust suction force, min. 7 ml mouthwash with 1,5 % hydrogen peroxide solution or 0,05 % cetylpyridine chloride solution or 0,12 % chlorhexidine digluconate solution in an extruded sachet, 1 sachet with min. 2 g of a water-based mouth moisturizer. Each single pack acts as a liquid container at the same time and allows for preparation of the working solution before opening the pack. Offered set as an element of components for round-the-clock oral toilet with clinically proven effectiveness in reducing VAP.Registered as a Class IIa medical device pcs. 3004 Yankauer type catheter with a casing and silicone tip with a working length of at least 14 cm after sliding the casing down, universal suction handle with a slide adjustment of suction force, "Y" connector for the suction system of the construction: two male ends bent at right angles to one female end (funnel). Medical device registered in class IIa pcs. 50 Adjustable flange tracheostomy tubeTracheostomy tube with an adjustable flange position with a locking mechanism to move the flange along the axis of the tube and rotate 360o, soft, thin-walled low-pressure cuff and Soft Seal system with a control balloon clearly indicating the cuff inflation (flat before inflation), made of a mixture of silicone and PVC - translucent, with indication of the tube size, type and diameter of the cuff on the control balloon and the variable length range given on the collar.1 No. 7.0 pcs. 42 No. 8.0 pcs. 43 No. 9.0 pcs. 4Aire-Cuff, reinforced, tracheostomy tube with adjustable flange position and cuff, with Aire-Cuff, reinforced, with centimetre depth markers, with marking on the flange of the inner and outer diameter.., length and diameter of the cuff, with overturner and 15mm connector, incl. clamp and breathing circuit disconnector wedge, sterile, ((parametric internal diameter (mm) / internal diameter (mm), length (mm0.))1 No. 6.0 ((6.0 8.7, 110)) pcs. 22 No. 7.0 ((7.0 10.0, 120)) pcs. 23 No. 8.0 ((8.0 11.0, 130)) pcs. 24 No. 9.0 ((9.0 12.3, 140)) pcs. 2 Tracheostomy tube with suction from the cuff - with movable sign. Made of thermoplastic PVC, silicized, for long-term ventilation, duct built into the wall of the tube for suction of the secretion from above the cuff, suction pipe ended with a universal connector, low-pressure cuff, high volume, X-ray line along the entire length of the tube, soft smooth, transparent sign wings in the version with a movable sign, guide, 2 fixing bands, control balloon marked with the size of the tube, insertion depth marker1 No. 6.5 length max. 77mm pcs. 52 No. 7,0 Length max. 85 mm pcs. 53 Nt 7,5 Length max. 93mm pcs. 54 No. 8,0 Length max. 98mm pcs. 5Linear tracheostomy tube with adjustable sign - silicone PVC with cuff. Made of thermoplastic PVC, movable signboard, silicone, low-pressure, high volume cuff, x-ray line over the entire length of the tube, soft smooth, transparent sign wings, guide, 2 fixing tapes, control balloon, latex-free, phthalon-free, sterile, disposable.1 No. 6.5 pcs. 52 No. 7.0 pcs. 53 Nt 7.5 pcs. 54 No. 8.0 pcs. 5 1 Diagnostic gloves, synthetic, nitrile, powder-free. Internal and external surface - butadiene polymer, internal chlorinated. Universal shape to fit right and left hand. Evenly rolled cuff edge. Delicately textured with additional texture at fingertips. Thickness on fingers min. 0,09 mm, thickness on hand min. 0,07 mm. Damage-resistant, AQL = 1.0, breaking strength in compliance with EN 455-2 > 6,5N. Can be easily and individually removed from the packaging. Dispenser and dispensing hole protected by additional anti-contamination film. Registered as a medical device in class I and personal protective equipment in category III. Resistant to chemical penetration (min. 10 substances at least 4). Type B to EN ISO 374-1. Resistant to virus penetration according to ASTM F 1671, tested for cytostatic penetration according to ASTM D 6978 (min. 14 drugs including Oxaliplatin and Gemzar). Protection against Carmustine min. 20 min. protection against Thiotepa min. 50 min. Useful for contact with food. No accelerators detectable in tests. Sizes XS-XL, packed in 100 pieces.2 Diagnostic gloves, nitrile for testing. Internal and external surface - butadiene polymer, internal chlorinated. Universal shape to fit right and left hand. Evenly rolled cuff edge. Gently textured with additional texture at fingertips. Thickness on fingers min. 0,08 mm, thickness on hand min. 0,05 mm. Resistant against mechanical damage, AQL = 1.0, breaking load after ageing in compliance with EN 455-2 > 6,0N. Conformity to EN 455 certified by a European notified body. Can be easily and individually removed from the packaging. Dispensing opening protected by an additional foil to prevent contamination of the contents. Registered as a Class I medical device and a Category III personal protective device. Resistant to chemical penetration (minimum 15 substances at level 4), resistant to alcohol penetration (20 % ethanol - level 6, isopropanol 70 % - level 6). Type B to EN ISO 374-1. Resistant to virus penetration according to ASTM F 1671, tested for cytostatic penetration according to ASTM D 6978 (min. 14 drugs). Manufactured in facilities with ISO 13485, ISO 14000, OHSAS quality management systems in place. Suitable for food contact according to REG. 1935/2004 and Recommendation XXI BfG. Sizes XS-XL, packed in 100 pieces. (XL 90 pcs.). 1 Diagnostic gloves, latex, powder-free, non-sterile, available in sizes XS - XL, packed in 100 pieces, textured outer surface, polymerised inner surface, glove length min. 240 mm, AQL = 1.5 Gloves that are both Class I medical devices and category III personal protective equipment, in accordance with EN 455(1-4), EN 374-1 off. 5.3.2, EN 374-2, EN 374-3, EN 420, EN 980, EN 1041, ASTM F1671,. Chemical resistance according to EN 374-3 min. test 16 chemicals marked on the packaging, resistant to virus penetration. Gloves suitable for food contact. Package a'100 pieces. Package equipped with 3 bigi - vertical folds in the perforation window - allowing the window to be "tilted" without having to open the window completely.2 Powderless, non-sterile latex gloves, available in sizes 6.0, 6.5, 7.5, 8.5 packed in 100 pieces, anatomically shaped gloves with opposing thumbs, textured outer surface, polymerized inner surface, glove length min. 280 mm, AQL = 1.5 Gloves that are both Class I medical devices and category I personal protective equipment, according to EN 455(1-4), resistant to viruses in accordance with ASTM F1671 - information on the packaging. Two-hole packaging for removing the glove from the right and left hand respectively.3 Diagnostic gloves dedicated for allergy sufferers and contact with chemotherapists (oncological patients), protective, powder-free nitrile, universal shape, rolled cuff, available in XS-XL size, packed in 100 pieces, polymerized on both sides, internally chlorinated, microtextured with additional texture at the fingertips, min. length. 300 mm long, AQL = 1.5 Gloves that are both Class I medical devices and Category III Type C personal protective equipment, in accordance with standards: EN 15223-1, EN 1041, EN 455(1-4), EN 420, EN ISO 374-1, EN 374-2, resistance to bacteria, fungi and viruses demonstrated in accordance with EN ISO 374-5, ASTM F1671-07, chemical resistance demonstrated in accordance with EN 16523-1 and EN 374-4 (min. 14 chemicals labelled on the package), resistance to cytostatic agents proven in accordance with ASTM D 6978 (min. 15 cytostatic agents labelled on the package), resistance to fentanyl citrate permeation time min. 240 min (confirmed by test performed in accordance with ASM D6978). Gloves suitable for allergy sufferers, confirmed by a test report performed in accordance with the Draize-95 modified skin sensitisation test for chemicals and the ISO 10993-10 international test for skin sensitisation. Gloves suitable for food contact - pre-marked on the packaging. Package equipped with 3 bigi - vertical folds in the perforation window - allowing to "tilt" the window, without the need to open it completely, not affecting the ease of opening the package.4 Diagnostic, protective, powder-free nitrile gloves, universal shape, rolled cuff, available in XS-XL sizes, 100 pieces each, polymerized on both sides, internally chlorinated, microtextured with additional texture at the fingertips, length min. 240 mm long, AQL = 1.5. Gloves that are both Class I medical devices and Category III Type B personal protective equipment, according to standards: EN 15223-1, EN 1041, EN 455(1-4), EN 420, EN ISO 374-1, EN 374-2, resistance to bacteria, fungi and viruses demonstrated in accordance with EN ISO 374-5, ASTM F1671-07, chemical resistance demonstrated in accordance with EN 16523-1 and EN 374-4 (min. 14 chemicals - marked on the packaging), resistance to min. 4 finished disinfectants according to EN 16523-1, resistance to cytostatic agents confirmed by tests according to ASTM D 6978 (min. 15 cytostatic agents - marked on the packaging). Package equipped with 3 bigi - vertical bends in the perforation window - enabling "tilting" of the window, without the need to open 1Drain for the OLYMPUS type - MAJ 1607Drain for the rinsing pump of the colonoscope compatible with the Olympus equipment (MAJ 1607 drain type) supplying water to the biopsy gastroscopy canal, while inhibiting bleeding from the upper gastrointestinal tract a'1sztSzt.50 1Biotomic biopsy stick, ellipsoidal shoulder, spiked, reusable, for the canal Ø 2.8 mm long ≥ 2300 mmzt.82Plugs for hot biopsy, reusable, for the canal Ø 2.8 mm long ≥ 2300 mm ellipsoidal shoulderszt.6 1Hemostasis needles, for the duct Ø 2.8 mm and length ≥ 2400 mm - size 19G/25G with length 4mm/6mmzt.100 1Disposable endoscope duct cleaning brushes. Duct diameter 2.8 mm, single-sided or double-sided brush Mast.100 1 Complete set for oesophageal varicose veins wrap (≥ 6 wraps/kits each), a set equipped with Luer -Lock port for flushing the operating field is allowed. Zest.50 1 Disposable biopsies with a length of ≥230 cm, for the endoscope canal 2.8 mmm for the so called hot biopsy (hot biopsies)pcs.100 1LyMPUS mammal filters - disposable pcs.50 1Balloons for dilatation of gastrointestinal stenosis with a length of 5, 5.5 and 8 cm and a diameter of 10 to 20 mm, preferably multistage balloons - i.e. with a diameter depending on the set pressure.pcs.10 1 Loop for polypectomy, monofilament, disposable oval, with a length of ≥ 230 cm to the endoscope canal 2.8 mmAØ 6 mmzt.50BØ 10 mm Mast.50CØ 15 mm Mast.30DØ 25 mm Mast.30EØ 30 mm/ Ø 32 mm Mast.20 1 Loop for polypectomy, single-use, rigid or semi-rigid (stiff or semi-stiff), length ≥ 230 cm for endoscope tray, for endoscope tray 2,8 mm. (oval or hexagonal). Loop with rotation function (rotatable).AØ 15 mm to Ø 13 mmzt.30BØ 24 mm to Ø 27 mmzt.30 1Positive disposable biopsies with a length of ≥230 cm, for the endoscope canal 2,8 mmm preferred ellipsoidal bladeszt.500 1Balloons medium-pressure three-stage balloons complete with a guideZ locking mechanism, approved for esophageal dilatation, pylorus, large intestine, and Vatera papilla channel, with variable diameter adjustable liquid pressure inside the balloon, rounded ends to allow observation of the dilatation site through the balloon wall and an additional channel for the guide, balloon length 5.5cm, each balloon expands in three diameters, balloon diameters available: 6 - 8; 8 - 10; 10 - 12; 12 - 15; 15 - 18 and 18 - 20mm (at the Customer's choice), catheter 7.5Fr in diameter, 180 and 240cm in length (at the Customer's choice), the catheter contains a fluorescent tag with clear information about the diameter and corresponding pressure, all balloon diameters work with a 2.8mm diameter endoscope working channel, sterile packaging.pcs.122Reusable, multifunctional device: for pumping balloons with a syringe 60 ccSzt.13High pressure syringe 60cc, with pressure gauge; compatible with the device in point 2 / 1Line for the OLYMPUS suction cups - disposable, KV 5 suction cup type (or equivalent solution) pcs.300 1Long drains for the OLYMPUS water pump - disposable pcs.50 1 Coagulation clips - 3.5 mm (Clutchcuter or Coaggrasper type) pcs.2300 mm long pcs.2 1Line, straight with side hole, maximum diameter 15 mm, distance from endoscope tip 4 mm; Pcs.A to panendoscopezt.10B to colonoscopezt.10 1Line loops for polypectomy - rotating, from 15 to 35 mmzt.10 1Line 1Line 1Line 1Line 1Line 1Line. Rotating tool for colonoscopic insertion of clips on bleeding vessels and stalks of polyps; cable for clip insertion ending in a cone, cooperates with sterile clips in cartridges; maximum diameter of the insertion part 2.75 mm, tool length 230 cm, minimum diameter of the working channel 2.8 mm; autoclavable.pcs.12Clips dedicated for reusable clips - type EZ Clip, clip - size L, length - 9mm (arm), opening angle 135o, number of clips - 40 pcs.Op.2 1Biotomy clips so called JUMBO - reusable, round, bucket, 3.4mm, 230cmzt.4 1Suction valve - for Olympus endoscopes. (Olympus 165 and Olympus 185)pcs.52Air-water valve for Olympus endoscopes. (Olympus 165 and Olympus 185)pcs.53Biotop valve - for Olympus endoscopes (Olympus 165 and Olympus 185)pcs.10 1Blastic plugs for the biopsy channel for OLYMPUS endoscope, class 185,Op.3 1Loop dedicated for cold (guillotine) as well as hot, rounded endoscopic polypectomy with open loop diameter: 10.15.25mm, loops with a wire diameter in the range of 0.3mm - 0.45mm, braided, min. length. 240cm for a 2.8mm, disposable canal.pcs.200 1Pole 5-chamber polyp trap - numbered chambers for marking the polyps, safe mesh substrate to prevent slipping of the collected tissue, flexible connection of the wire to the suction pump.pcs.20 Endoscopic balloon catheter - TYPE WITH A PRODUCTOR - for esophagus, pylorus and colon, min. Duct diameter - 2.8mm, catheter length 2400mm, balloon length 55mm, max. filling pressure 6.5 atm/bar, recommended volume of fluid 45ml, recommended guide - max. 0.035"1Endoscopic balloon catheterPcs.20 Eyepiece frame with replaceable covers - safety glasses for operating block Convenient, adjacent safety glasses, made in UltraClear technology prevents glare, lens fogging and static energy, the frame is adjusted to the forehead to prevent splashing of eyes from the top of the glasses. The lenses adhere tightly to the frames, are easy to fasten and the self-closing, self-closing holes, according to the OSHA standard, can be used on corrective glasses. The upper edge of the lens has a matt coloured strap that makes it easier to grasp the lenses while they are being put on, without leaving any fingerprints.1Ophthalmic rationStep.1002Smountable covers (lenses)pcs.1000 1 Endoprosthetic Plastic blade Single-use, sterile, double-packed - Blade compatible with Stryker Oscillating Saws System 5-7 - Cutting edge divided into two parts with space to evacuate bone chips from the cutting line - Dimensions W x D x L in mm: 18x0.89x75Szt.602Endoprosthetic Plastic Blade Disposable, sterile, double packed - Blade compatible with Stryker Oscillating Saws System 5-7 - Cutting edge divided into two parts with space to evacuate bone chips from the cutting line -Dimensions W x D x L in mm: 25x1.27x90Szt.603Short Blade Single-use, sterile, double pack - Blade compatible with Stryker System 5-7 oscillating saws - Dimensions W x D x L in mm: 9x0.76x24.5zt.54 Short Blade Single-use, sterile, double pack - Blade compatible with Stryker System 5-7 oscillating saws - Dimensions W x D x L in mm: 9x0.58x22.5zt.55Endoprosthetic Plastic Blade Disposable, sterile, packed in a double pack - Blade compatible with Stryker System 5-7 Oscillating Saws - Cutting edge divided into two parts with space to evacuate bone chips from the cutting line - Dimensions W x D x L in mm: 13x0.89x90Pht.60 STRYKER1for saws and drills STRYKER1For saws and drills STRYKERSzt.2 Batteries for UPS1AEuropower type battery - 12V 7 - 7.2Ahzt.20 O2 sensors for anesthesia unit1Aesthesia unit Fabiusz, CE and PRIMUS(Dreager)pcs.6 Reusable capnograph water traps for the anaesthesia device1FABIUS CESzt.202PRIMUSSzt.203CSSzt.20 1Filter for CO2 absorber (lime sponge) - pack of 40 pcs.pcs.160 1Drainage for arthropompaSzt.30 1Flow sensor for NBP ventilator 840Szt.4 Exhalation filter for the NBP Ventilator 8401 Single-use filter for drainage system RE/X800 and D/X 800 Series Ventilators 800Szt.150 1 OVERAL BIRTH FRAME TYPE OF MUENSTER DIMENSIONS 408X350 MM CONSTRUCTING FROM TWO PARTS OF THE EXPENSIVE STRUCTURE PACKAGE.12SHELL HACK Size II depth 80 MM width 80 MM to the frame of the MUENSTERSTERSHIP TYPE.26 SHELL HACK Size II depth 50 MM width 105 MM to the frame of the MUENSTERSHIP TYPE.27OPERATING HACK TYPE OF KELLY DIMENSIONS 220 MM WIDTH WIDTH 70 MM TO THE MUENSTERSTERSTERSTERSTERSTERSTERSTERSTERSTERSTER.110 HACK TO THE MUENSTERSTERSTERSTERSTERSTERSTERSTERSTER.111frame holding frame.112 lifting and holding hook to the operating field.113Base frame adjustment of the OPER TABLE.114 COST OF MUENSTER SYSTEM 540X253X100 MM WITH STAGE 115 COST OF MUENSTER SYSTEM 540X253X50 MM WITH STAGE 1 1- Surgical drape for laparoscopic procedures in size 250175/270x260 cm, with a self-adhesive rectangular opening in the shape of 25x30 cm, surrounded by a flex foil, ensuring tight adhesion during insurrection. The hole is surrounded by an additional absorbent layer 40x70cm, with a weight of 70 g/m2. Covering equipped with two two-chamber PE foil pockets on both sides of the hole size 5x45 cm and cable organizers. Covering equipped with a comfortable layer on the patient's side, with a weight of 12 g/m2, resistance to penetration of liquids min 100 cm H2O, and wet/dry tear resistance 49/57 kPa. - 1 pc. Sticky tape 9x49 cm - 1 pc. Tray made of polypropylene 25x14x5 cm, 1575 ml, blue - 1 pc. 14G veress needle, 150 cm stopper with audible, visual and perceptible feedback. Safety blade retractable. On/Off valve - 1 pc. 8x9 cm dressing, ventilon fixation - 1 pc. 9x10 cm dressing - 4 pcs. Trokar pushing, bluntless, 12mm with transparent, corrugated cannula. Double gasket in Trokar - outer gasket reinforced with plastic flakes for easy tool introduction. Bluntless overburdener with two push wings. Cannula valve - 2-stage cannula insulating or stop. Tapered entrance to the cannula to make it easier to hit the tool. Ergonomic plastic handles for easier trocar insertion. Built-in reduction 5-12 mm - 1 pcs.Set2-Cutterfree 12 mm - disposable optical trocar, diameter 12 mm, length 150 mm, diagonally ended translucent cannula with ribbing in the shape of an inverted Christmas tree, possible to insert tools from 4.7 mm to 12.7 mm without the need for additional reductions, 2-stage valve for insufflation and descent, op. a'6 pcs.Op.3Optical Trocar - disposable optical trocar, 12mm diameter, 150mm length, diagonally ended transparent cannula with ribbing in the shape of an inverted Christmas tree, possible insertion of tools from 4.7mm to 12.7mm without the need for additional reductions, two-stage valve allowing for insulating and desfoliating, trocar equipped with technology to reduce the smearing of the endoscope by wiping, draining and absorbing fluids that accumulate inside the case of the trocar seal, op. a'6 pcs.Op.1 Stimuplex needle Ultra 360, compatible with Stimuplex B.Braun, a special atraumatic cut tip with special 20 mm hyperechoic needle tip marking, indicating the precise position of the needle tip, insulated except for the tip itself, with a connecting cable to the devicen, with a 50 mm long anaesthetic supply tube, with the following dimensions: 30 degrees 0.7 x 50 mm.2 Stimuplex Ultra 360 needle, compatible with Stimuplex B.Braun device, tip with special atraumatic grinding and special hyperechoic needle tip marking in a 20 mm run, indicating the precise position of the tip of the needle, insulated except for the tip itself, with a connecting cable to the machine with a 100 mm long anaesthetic supply line, with the following dimensions: 30 degrees 0,90 x 100 mm. 1 REUSABLE LAPAROSCOPIC SCISSORS FOR STERILIZATION TYPE. METZENBAUM BENT, BOTH WORKING PARTS MOVABLE, SERRATED CUTTING PART, Ø 5MM, LENGTH: Ø 5MM. WORKING PART 330MM LONG, DISMOUNTABLE INTO 2 ELEMENTS (WORKING INSERT, EXTERNAL SHAFT PERMANENTLY CONNECTED TO THE HANDLE). SHAFT WITH LUER-LOCK COUPLING FOR CLEANING, POSSIBILITY OF ROTATION 360˚. HANDLE MADE OF PEEK PLASTIC WITH MONOPOLAR PLUG MAX 1.3 KVP. WORKING AND EXTERNAL SHAFT ON CLICK. pcs.22LLES OF LAPAROSCOPE MULTIPLICAL USE FOR TYPE STERILIZATION. DEBAKEY, ATRAUMATIC, STRAIGHT, BOTH PARTS WORKING MOVABLE, Ø 5MM, LENGTH 360MM WORKING PART, REMOVABLE INTO 3 PARTS (WORKING INSERT, EXTERNAL SHAFT, HANDLE). SHAFT WITH LUER-LOCK COUPLING FOR CLEANING, 360˚ ROTATION POSSIBLE. HANDLE MADE OF PEEK PLASTIC WITH MONOPOLAR PLUG UP TO MAX 1.3 KVP. HANDLE WITH A LOCK OF SHAFT ROTATION AFTER CLOSING AND A LOCK ON THE HANDLE OF CLOSING THE WORKING PART. EXTERNAL SHAFT AND EXTERNAL SHAFT CONNECTED with a thread.pcs.23LESH LAPAROSCOPE MULTIPARELLY USED FOR TYPE STERILIZATION. CLEEVE DUCK, STRAIGHT, SERRATED, WINDOW, BOTH PARTS WORKING MOVABLE, Ø 5MM, LENGTH 360MM WORKING PART, REMOVABLE INTO 3 PARTS (WORKING INSERT, EXTERNAL SHAFT, HANDLE). SHAFT WITH LUER-LOCK COUPLING FOR CLEANING, 360˚ ROTATION POSSIBLE. HANDLE MADE OF PEEK PLASTIC WITH MONOPOLAR PLUG UP TO MAX 1.3 KVP. HANDLE WITH A LOCK OF SHAFT ROTATION AFTER CLOSING AND A LOCK ON THE HANDLE OF CLOSING THE WORKING PART. WORKING INLETTER AND EXTERNAL SHAFT CONNECTED with a thread.pcs.24K LAPAROSCOPE LAPARSHIP MULTIPLICAL USE FOR TYPE STERILIZATION. DUCK BIILL, STRAIGHT, TOOTHED, WINDOW, ONE PART WORKING MOVABLE, Ø 5MM, LENGTH 360MM WORKING PART, REMOVABLE INTO 3 PARTS (WORKING INSERT, EXTERNAL SHAFT, HANDLE). SHAFT WITH LUER-LOCK COUPLING FOR CLEANING, 360˚ ROTATION POSSIBLE. HANDLE MADE OF PEEK PLASTIC WITH MONOPOLAR PLUG UP TO MAX 1.3 KVP. HANDLE WITH A LOCK OF SHAFT ROTATION AFTER CLOSING AND A LOCK ON THE HANDLE OF CLOSING THE WORKING PART. EXTERNAL SHAFT AND EXTERNAL SHAFT CONNECTED with thread.pcs.25KLES OF LAPAROSCOPE MULTIPARELLY USED FOR TYPE STERILIZATION. DORSEY, STRAIGHT, SERRATED, WINDOW, LENGTH. 40 MM, BOTH PARTS WORKING MOVABLE, Ø 5 MM, LENGTH 360MM WORKING PART, REMOVABLE INTO 3 PARTS (WORKING INSERT, EXTERNAL SHAFT, HANDLE). SHAFT WITH LUER-LOCK COUPLING FOR CLEANING, 360˚ ROTATION POSSIBLE. HANDLE MADE OF PEEK PLASTIC WITH MONOPOLAR PLUG UP TO MAX 1.3 KVP. HANDLE WITH A LOCK OF SHAFT ROTATION AFTER CLOSING AND A LOCK ON THE HANDLE OF CLOSING THE WORKING PART. WORKING AND EXTERNAL SHAFT CONNECTED BOARD.pcs.25a LAPAROSCOPE WORKING CONCLUSION FOR TYPE STERILIZATION. DORSEY, STRAIGHT, TOOTHED, WINDOW, LENGTH. 40 MM, BOTH PARTS WORKING MOVABLE, LENGTH 40 MM. WORKING PARTS 360MMSzt.25bSHAFT EXTERNAL LAPAROSCOPE LARGE USE FOR STERILIZATION Ø 5MM, LENGTH 360 MM WORKING LENGTH AND EXTERNAL SHAFT CONNECTIONED WITH A GUINT.pcs.25cERGONOMIC LAPAROSCOPE TOOL HANDLE made of PEEK PEEK with MONOPOLAR Plug for MAX 1.3 KVP. SHAFT ROTATION LOCK ON THE CLOSE AND LOCK ON THE CLOSE PART OF THE WORKING PART.26SHAFT EXTERNAL LAPARRICULTURAL LAPARRICULTURAL USE FOR STERILIZATION Ø 5MM, LONG. 360 MM WORKING LENGTH AND EXTERNAL SHAFT CONNECTED with a thread.pcs.27 LAPAROSCOPE LAPAROX COPPING CLASSICS FOR MULTI-MADE TYPE-SALLISATION USE. DORSEY, STRAIGHT, SERRATED, WINDOW, LENGTH. 40 MM, BOTH PARTS WORKING MOVABLE, Ø 5 MM, LENGTH WORKING PART 450MM LONG, DISASSEMBLABLE INTO 2 ELEMENTS (WORKING INSERT, EXTERNAL SHAFT PERMANENTLY CONNECTED TO THE HANDLE). SHAFT WITH LUER-LOCK COUPLING FOR CLEANING, 360˚ ROTATION POSSIBILITY. HANDLE MADE OF PEEK PLASTIC WITH MONOPOLAR PLUG MAX 1.3 KVP. WORKING AND EXTERNAL SHAFT ON CLICK. 28KLES LAPAROSCOPE LAYERLOCKS FOR TYPE STERILIZATION. MARYLAND, BENT, SERRATED, BOTH PARTS WORKING MOVABLE, Ø 5MM, LENGTH WORKING PARTS 360MM, COLLECTED TO THREE ELEMENTS (WORKING IN, SHAFT 1Surgical mask Surgical mask, traction-bound, three-layer. Cardboard packaging in the form of a feeder, which ensures hygienic storage and removal, clearly described in Polish. Packed in 50 pcs.The mask should meet the requirements of standard 14683 (type II). Required BFE (bacterial filtration) ≥98%. Colour blue or greenSurgical mask IIISurgical four-layer surgical mask with ribbons of 83g/m2 weight with transparent, anti-reflective and steam-free eye shield. Complies with standard 14683, type IIR, BFE > /=98%, differential pressure <49.0 Pa/cm2, resistant to penetration (>120mmHg). Packed in 25 pcs.pcs.3Surgical fusion-cut surgical cap Made in the side and top of perforated non-woven fabric, with rubber band on the back. Wrapped in cardboard boxes to ensure hygienic storage and removal, blue/green colour, size /expanded/. Made on the basis of viscose smooth and perforated non-woven fabric with a minimum weight of 26 g/m2. Surgical cap made of air-permeable perspiration-absorbing non-woven fabric, with an elastic band on the back. Wrapping in cardboard boxes for hygienic storage and removal, colloquially, beret type Surgical beret type Surgical shoe coversSurgical shoe covers made of thick and strong non-woven fabric, non-toxic, non-dusting, breathable, for use in clean room environments. Colour green or white7Sterile surgical apron for long procedures, made of light and airy SMS-type non-woven fabric, colour blue with a minimum weight of 35 g/m2; equipped with waterproof inserts at the front and on the sleeves (sleeves at the height of the inserts sewn using the ultrasonic technique, ensuring full barrier properties); apron folded in a way ensuring aseptic application, tied to the inner and outer tracts with a cardboard box, at the back a Velcro fastener, glued tracts. Individual size and type marking printed on the apron for identification before unfolding. Packaging foil-paper with min. 2 adhesive labels, inner paper wrap, 2 cellulose towels included. In compliance with EN 13795 - high requirements. Sizes: L, LL, XL, XLL8Sterile surgical gown reinforced - for long procedures, providing high thermal comfort for the operator, made of soft, airy spunlaced nonwoven fabric with hydrophobic properties, weight min. 68 g/m2; equipped with waterproof inserts at the front and on the sleeves (sleeves at the height of the inserts sewn together using the ultrasonic technique, ensuring full barrier properties); apron folded in a way ensuring aseptic application, tied to the inner and outer tracts with a cardboard box, at the back with a Velcro fastener. Individual size and type marking printed on the apron for identification before unfolding. Vacuum-packed. Packaging foil-foil with min. 2 adhesive labels, inner paper wrap, 2 cellulose towels included. In compliance with EN 13795 - high requirements. Sizes: L, LL, XL, XLL, XXL-L, XXL-XL9Manufactured from a cotton-like non-woven fabric with a minimum weight of 49 g/m2 containing 100% polypropylene, antistatic, non-dusting, breathable, intended for use by medical personnel in the operating theatre environment. Clothing with increased resistance to push-out - dry min. 190 kPa (test acc. to EN ISO 13938-1); particle cleanliness equal to 2.0 IPM (test acc. to EN ISO 9073-10), dustiness equal to 2.1 Log10 (particle count) (test acc. to EN ISO 9073-10). The short sleeve sweatshirt should be fitted with a nap (under the neck), three practical pockets: one on the chest and two at the bottom. Trousers with trouser pull, side pocket on the leg with a flap fitted with napkin. Sweatshirt and trousers packed separately, available in the following sizes: XS,S,M,L,XL,XXL,XXL,3XL,4XL in green, with individual 1-way dry cleaners for washing and care of the patient's skin, covered with a washing agent on both sides of the glove. 1a Seldinger-style, double-lumen, double-lumen set for large vessel cannulation, containing a 15, cm 7F polyurethane catheter with a channel diameter of 16/16G, an integrated, one-piece V-needle (the guide can be inserted without disconnecting the syringe, the risk of air blockage is reduced, a bendable guide made of a nickel-titanium core, and cables enabling control of catheter position in the ECG. In a separate, sterile package: 1 needleless access to each light, 5 ml syringe with luer-lock end, blade, expander, sliding, adjustable wings. pcs. 201b Set for large vessel cannulation using the Seldinger method, two-lumen, containing a 20, cm 7F polyurethane catheter with a channel diameter of 16/16G, an integrated, one-piece V-needle (the possibility of inserting the guide without disconnecting the syringe, reduction of the risk of air congestion, bend resistant guide made of a nickel-titanium core, cables enabling control of catheter position in the ECG. In a separate, sterile package: 1 needleless access to each light, 5 ml syringe with luer-lock end, blade, expander, sliding, adjustable wings. 60 Three-lumen catheter for large vessel cannulation using Seldinger2a Seldinger large vessel cannulation kit, three-lumen, containing a polyurethane long catheter. 15, cm 7F with a channel diameter of 16/18/18G, an integrated, one-piece V-needle (the guide can be inserted without disconnecting the syringe, the risk of air blockage is reduced, the guide made of a nickel-titanium core is resistant to bending, and the cable enables control of catheter position in ECG. In a separate, sterile package: 1 needleless access to each light, 5 ml syringe with luer-lock end, blade, expander, sliding, adjustable wings. pcs. 802b Set for large vessel cannulation using the Seldinger method, three-lumen, containing a 20 cm long 7F polyurethane catheter with a channel diameter of 16/18/18G, an integrated, one-piece V-needle (possibility of inserting the guide without disconnecting the syringe, reduction of the risk of air congestion, bend resistant guide made of a nickel-titanium core, cables enabling control of catheter position in ECG. In a separate, sterile package: 1 needleless access to each light, 5 ml syringe with luer-lock end, blade, expander, sliding, adjustable wings. 150 Quadruple-lumen catheter for large vessel cannulation using the Seldinger method3a Set for large vessel cannulation using the Seldinger method, four-lumen, containing a polyurethane long catheter. 15 cm 8F with a channel diameter of 14/18/18/16G, an integrated, one-piece V-needle (the guide can be inserted without disconnecting the syringe, the risk of air blockage is reduced, the guide made of a nickel-titanium core is resistant to bending, and the cable enables control of catheter position in ECG. In a separate, sterile package: 1 needleless access to each light, 5 ml syringe with luer-lock end, blade, expander, sliding, adjustable wings. 303b Set for large vessel cannulation using the Seldinger method, four-lumen, containing a 20 cm 8F polyurethane catheter with a channel diameter of 14/18/18/16G, an integrated, one-piece V-needle (possibility of inserting the guide without disconnecting the syringe, reduction of the risk of air congestion, bend resistant guide made of a nickel-titanium core, cables enabling control of catheter position in ECG. In a separate, sterile package: 1 needleless access to each light, 5 ml syringe with luer-lock end, blade, expander, sliding, adjustable wings. 60Centre injection kit with a five-lumen catheter4 Set composition: Set every metre central vein catheterization. Seldinger's central vein catheterization kit. Five-lumen catheter, outer diameter 12F, 15 cm long, inner diameter; 16/18/18/18/12G. 1 Disposable half mask with exhalation valve for protection against solid particles, non-volatile liquid particles and bioaerosols. For use in medical environments, including surgical and other medical procedures. Conforms to Directives 89/686/EEC (for personal protective equipment) and 93/42/EEC (for medical devices). Meets the requirements of EN 14683:2005, EN 149:2001+A1:2009. Provides 98 % bacterial filtration efficiency and 120 mmHg splash resistance. Filtration material with low breathing resistance and high filtration efficiency.3-panel foldable 3-panel construction of the half mask with profiled nose part made of soft foam, ensuring compatibility with safety glasses and goggles.2 Protective respirator-respirator, complying with EN149:2001, for the protection of medical personnel, with covered exhalation valve and surgical filter, three-layer electrostatic filter made of polypropylene, three-panel folding construction of the half mask ensuring perfect adhesion to the face, with two head tapes made of polyisopropylene ensuring even pressure and fitting of the half mask, exhalation valve made of polyisopropylene, mask protection class - FFP3, min. Filtration capacity min. 99 %, particle filtration 0.3-0.5 micrometer, Medical device according to EN 14683:2005, type IIR, for the protection of the respiratory tract in contact with the patient (especially tuberculosis, pneumonia, diphtheria...) shall protect both the user and his environment

Opportunity closing date

02 February 2021

Value of contract

to be confirmed