United States - Grounding,Wire,Bushings
For more information and to make a bid you will need to go to the third party website.
Details
Provided by- Opportunity closing date
- 25 September 2024
- Opportunity publication date
- 10 September 2024
- Value of contract
- to be confirmed
- Your guide to exporting
Description
SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy. As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions
Please fill out and acknowledge the following documents
Buy American Act Certification (BAA)
Fixed Price Commercial Supplies and Services
Reps and Cert - Rider
Required item(s) listed below:
GROUNDING, WIRES, BUSHINGS, ACCESSORIES
QTY: 823 Ft
Product description : # 4/0 AWG GROUNDING CONDUCTOR
2. QTY : 124 ft
Product description : # 2 AWG INSULATED GROUNDING CONDUCTOR
3.QTY : 18 each
Product description : CONDUIT GROUND BUSHING & LUG 4"
4. Qty : 3 each
Product description : CONDUIT GROUND BUSHING & LUG 2.5"
5. Qty : 5 each
Product description : CONDUIT GROUND BUSHING & LUG 1"
6. Qty : 13 each
Product description : CONDUIT BUSHING 4"
7. Qty : 3 each
Product description : CONDUIT BUSHING 2.5"
8. Qty : 5 each
Product description : CONDUIT BUSHING 1"
9. Qty: 376 each
Product description : GROUND WIRE CLAMP GC2626CT
10. Qty : 144 Ft
Product descriptiion : # 6 AWG INSULATED GROUNDING CONDUCTOR
11. Qty : 40 each
Product description : Burndy YC Compression C-Tap Connectors 4/0 AWG 2 AWG 6 AWG 3/0 AWG
CABLE TRAY ACCESSORY
Qty: 59 each
- Product descirption : STRAIGHT SECTION DIVIDER - 10'
Qty: 1 each
Product description : VERTICAL BEND BARRIER DIVIDER VER IN 45
Qty : 1 each
Product description : VERTICAL BEND BARRIER DIVIDER VER OUT 45
Qty : 8 each
Product description : VERTICAL BEND BARRIER DIVIDER VER OUT 90
Qty : 16 each
Product description : HORIZENTAL BEND BARRIER DIVIDER 90
Qty : 100 each
Product description : STANDARD L-SHAPE SPLICE PLATE (Comes in pairs with HW)
Qty : 3 each
Product description : HORIZONTAL ADJUSTABLE SPLICE PLATES
Qty: 230 each
Product description : LADDER DROP-OUT 9"
Qty : 113 each
Product description : LADDER DROP-OUT 12"
Qty : 19 each
Product description :LADDER DROP-OUT 18"
Qty: 12 each
Product description : LADDER DROP-OUT 24"
Qty: 106 each
Product description : LADDER DROP-OUT 30"
Qty: 5 each
Product description : LADDER DROP-OUT 36"
CONDUITS AND FITTINGS
Qty : 257 feet
Product description : INTERMEDIATE METALLIC CONDUIT - 4", length 10 ft.
Qty : 2 each
Product description : INTERMEDIATE METALLIC CONDUIT RISER - 4" DIA Elbow 16" radius length
Qty : 12 Feet
Product description : INTERMEDIATE METALLIC CONDUIT - 1" DIA Atkore #358176 10FT
Qty : 29 Feet
Product description : ELECTRICAL METALLIC TUBING - 1" DIA
Qty : 70 Feet
Product description : INTERMEDIATE METALLICCONDUIT - 2.5" DIA 10FT
Technical Criteria
Grounding conductor -
- #4/0 AWG,
- Bare Copper
Insulated Grounding Conductor -
- #2 AWG, #6 AWG
- Insulated copper conductor
3. Conduit bushing -
for EMT conduits
4. Conduit grounding bushings -
- Malleable Iron Zinc Plated
- Wire Range 14 to 2/0
- For use with Rigid/IMC Conduit
5. Ground wire clamp
Tin-plated cast copper
Can handle one or two conductors, copper or aluminum cable
Low profile head with deep Phillips recess
Galvanized steel bolt has ribbed neck preventing rotation during installation when installed in a 0.44 diameter hole
- Rated for Direct Burial in earth or concrete
6. Compression C-Tap Connectors:-
Copper Compression
3/0 AWG (SOL)-4/0 AWG (STR) (RUN)
6 AWG (SOL)-2 AWG (STR) (TAP)
- 1-1/16" C-TAP Length
7. Cable Tray dividers, splices and dropouts:-
- Hot dipped Galvanized after fabrication
8. IMC Conduits and fittings:-
Intermediate metallic conduit
10 ft long
Galvanized
- Smooth interior coating
9. EMT Conduits and fittings:-
EMT Conduits and fittings
10 ft long
Electroplated
- Smooth interior coating
Quote is for product only; no on-site services permitted.
Source selection will be based on Lowest Priced Technically Acceptable.
Please provide a price and lead time quotation by COB 9/25/2024.
Send quote to anthonyc@slac.stanford.edu.
Please be advised that the requirement was also posted in SAM.gov.
Is there any room for additional discount such as for Academic, ICPT, GSA, or Government Institutions?
Buy American Act Certification (BAA) applies to awards over $10,000.
Representations & Certifications Rider is required. Once completed the Reps and Certs is valid for one year until renewal. If you have already completed one within the year please disregard. Otherwise, please complete and return.
All subcontractors are required to register in the System for Award Management (www.sam.gov).
If possible, please provide a link to your webpage for published price list to substantiate for the prices quoted.
The resulting purchase order will be issued on a fixed price basis. SLAC National Accelerator Laboratory Terms and Conditions for Fixed Price Commercial Supplies and Services (Rev. August 2023) will be made a part of the resulting order.
Payment Terms will be NET-30
Freight terms will be FOB Destination Prepaid and Add
You are requested to mark and identify proprietary/confidential information provided in response to the solicitation.
Contact me directly with any questions.
Sincerely,
Anthony Chin
Procurement Commodities Team
anthonyc@slac.stanford.edu
SLAC National Accelerator Laboratory
2575 Sand Hill Road
Menlo Park, CA 94025
- Opportunity closing date
- 25 September 2024
- Value of contract
- to be confirmed
About the buyer
- Address
- SLAC Natl Accel Lab -DOE Contractor
Bid for tender
If your company meets the requirements of the tender, go to the website where the tender is hosted and submit your bid.
This website contains links to other websites that we do not control or maintain. We are not responsible for the content of these sites. We provide these links for your convenience only, and do not necessarily endorse their content.
Before entering into a contract you need to apply for any necessary export licences, which can include applications to trade in certain goods. You should also make your own enquiries and be satisfied by the accuracy of any information supplied to you.