United States - Grounding,Wire,Bushings

Description

View Changes SLAC National Accelerator Laboratory is operated by Stanford University for the Department of Energy.  As a management and operating contractor, subcontracts awarded by the Laboratory are not Federal procurements, and are not directly subject to the Federal Acquisition Regulations in 48 CFR. Nonetheless, certain Federal laws, Executive Orders, and regulations may affect our DOE approved purchasing system, as required by statute, regulation, or contract terms and conditions
AMENDMENT 01 
The following Addendum 01 is being issued for the subject Request for Quote: 349406.

Answer to the questions in red: 

Dimensions of the cable tray -

1     12"x4" HDGAF STEEL LADDER TRAY 45° VERT IN, 12"(R)                                          
2     12"x4" HDGAF STEEL LADDER TRAY 45° VERT OUT, 12"(R)                                        
3     12"x4" HDGAF STEEL LADDER TRAY 90° HORZ CNR, 12"(R)                                           
4     18"x4" HDGAF STEEL LADDER TRAY 90° HORZ CNR, 12"(R)                                          
5     24"x4" HDGAF STEEL LADDER TRAY 90° HORZ CNR, 12"(R)                                         
6     24"x4" HDGAF STEEL LADDER TRAY 90° VERT OUT, 12"(R)                                          
7     30"x4" HDGAF STEEL LADDER TRAY 90° HORZ CNR, 12"(R)                                         
8     30"x4" HDGAF STEEL LADDER TRAY 90° VERT OUT, 12"(R)                                           
9     (36" -24")x4"(H) HDGAF STEEL LADDER TRAY T REDUCER SECTION                                         
10    36"x4" HDGAF STEEL LADDER TRAY 90° HORZ CNR, 12"(R)                                          
11    24"x6" HDGAF STEEL LADDER TRAY 90° VERT OUT, 12"(R)                                           
12    18"x4" HDGAF STEEL LADDER TRAY X SECTION, 12"(R)                                              
13    30"x4" HDGAF STEEL LADDER TRAY T SECTION, 12"(R)                                            
14    36"x4" HDGAF STEEL LADDER TRAY T SECTION, 12"(R)                                              
15    24"x4" HDGAF STEEL LADDER TRAY T SECTION, 12"(R)                                              
16    24"x4" HDGAF STEEL LADDER TRAY 90° VERT OUT, 12"(R)        

This Addendum modifies the Request for Quotation and must be acknowledged. Failure to acknowledge all addenda could make your proposal non-responsive. Please confirm that the submitted proposal is not changed because of this addendum. If proposal sent is revised because of this, please submit the revise proposal.

The following changes are hereby made to the appropriate documents contained the above-mentioned Request for Quotation (RFQ). All other terms and conditions of the RFQ remain the same.

Thank you.

Best,
Anthony Chin
Procurement Commodities Team
anthonyc@slac.stanford.edu
SLAC National Accelerator Laboratory
2575 Sand Hill Road
Menlo Park, CA 94025

Please fill out and acknowledge the following documents

Buy American Act Certification (BAA)
Fixed Price Commercial Supplies and Services
Reps and Cert - Rider

Required item(s) listed below:

GROUNDING, WIRES, BUSHINGS, ACCESSORIES

QTY:  823 Ft

Product description : # 4/0 AWG GROUNDING CONDUCTOR

    2. QTY : 124 ft

Product description : # 2 AWG INSULATED GROUNDING CONDUCTOR

    3.QTY : 18 each

Product description : CONDUIT GROUND BUSHING & LUG 4"

        4. Qty : 3 each

Product description : CONDUIT GROUND BUSHING & LUG 2.5"

    5. Qty : 5 each

Product description :  CONDUIT GROUND BUSHING & LUG 1"

    6. Qty : 13 each

Product description : CONDUIT BUSHING  4"

    7. Qty : 3 each

Product description : CONDUIT BUSHING 2.5"

    8. Qty : 5 each

Product description :  CONDUIT BUSHING  1"

    9. Qty: 376 each

Product description : GROUND WIRE CLAMP GC2626CT

   10. Qty : 144 Ft

Product descriptiion : # 6 AWG INSULATED GROUNDING CONDUCTOR

   11. Qty : 40 each

Product description : Burndy YC Compression C-Tap Connectors 4/0 AWG 2 AWG 6 AWG 3/0 AWG

CABLE TRAY ACCESSORY

Qty: 59 each

- Product descirption : STRAIGHT SECTION DIVIDER - 10'

Qty: 1 each

 Product description : VERTICAL BEND BARRIER DIVIDER VER IN 45

Qty : 1 each

Product description : VERTICAL BEND BARRIER DIVIDER VER OUT 45

Qty : 8 each

Product description : VERTICAL BEND BARRIER DIVIDER VER OUT 90

Qty : 16 each

Product description : HORIZENTAL BEND BARRIER DIVIDER  90

Qty : 100 each

Product description : STANDARD L-SHAPE SPLICE PLATE (Comes in pairs with HW)

Qty : 3 each

Product description : HORIZONTAL ADJUSTABLE SPLICE PLATES

 Qty: 230 each

Product description : LADDER DROP-OUT 9"

 Qty : 113 each

Product description : LADDER DROP-OUT 12"

Qty : 19 each

Product description :LADDER DROP-OUT 18"

Qty: 12 each

Product description : LADDER DROP-OUT 24"

Qty: 106 each

Product description : LADDER DROP-OUT 30"

Qty: 5 each

Product description : LADDER DROP-OUT 36"

CONDUITS AND FITTINGS

Qty : 257 feet

Product description : INTERMEDIATE METALLIC CONDUIT - 4", length 10 ft.

Qty : 2 each

Product description : INTERMEDIATE METALLIC CONDUIT RISER - 4" DIA Elbow 16" radius length

Qty : 12 Feet

Product description : INTERMEDIATE METALLIC CONDUIT - 1" DIA Atkore #358176 10FT

Qty : 29 Feet

Product description : ELECTRICAL METALLIC TUBING - 1" DIA

Qty : 70 Feet

Product description : INTERMEDIATE METALLICCONDUIT - 2.5" DIA 10FT

Technical Criteria

Grounding conductor - 

      - #4/0 AWG,
      - Bare Copper

Insulated Grounding Conductor - 

- #2 AWG, #6 AWG

  - Insulated copper conductor

       3. Conduit bushing - 
              for EMT conduits 

       4. Conduit grounding bushings -
             - Malleable Iron Zinc Plated
             - Wire Range 14 to 2/0
             - For use with Rigid/IMC Conduit

       5.  Ground wire clamp
Tin-plated cast copper
Can handle one or two conductors, copper or aluminum cable
Low profile head with deep Phillips recess
Galvanized steel bolt has ribbed neck preventing rotation during installation when installed in a 0.44 diameter hole

- Rated for Direct Burial in earth or concrete

       6. Compression C-Tap Connectors:-
Copper Compression
3/0 AWG (SOL)-4/0 AWG (STR) (RUN)
6 AWG (SOL)-2 AWG (STR) (TAP)
             - 1-1/16" C-TAP Length

       7. Cable Tray dividers, splices and dropouts:-

- Hot dipped Galvanized after fabrication

       8. IMC Conduits and fittings:-
Intermediate metallic conduit
10 ft long
Galvanized

- Smooth interior coating

       9. EMT Conduits and fittings:-
EMT Conduits and fittings
10 ft long
Electroplated

- Smooth interior coating

Quote is for product only; no on-site services permitted.

Source selection will be based on Lowest Priced Technically Acceptable.

Please provide a price and lead time quotation by COB 9/25/2024.
Send quote to anthonyc@slac.stanford.edu.

Please be advised that the requirement was also posted in SAM.gov.

Is there any room for additional discount such as for Academic, ICPT, GSA, or Government Institutions?

Buy American Act Certification (BAA) applies to awards over $10,000.

Representations & Certifications Rider is required. Once completed the Reps and Certs is valid for one year until renewal. If you have already completed one within the year please disregard. Otherwise, please complete and return.

All subcontractors are required to register in the System for Award Management (www.sam.gov).

If possible, please provide a link to your webpage for published price list to substantiate for the prices quoted.

The resulting purchase order will be issued on a fixed price basis. SLAC National Accelerator Laboratory Terms and Conditions for Fixed Price Commercial Supplies and Services (Rev. August 2023) will be made a part of the resulting order.

Payment Terms will be NET-30

Freight terms will be FOB Destination Prepaid and Add

You are requested to mark and identify proprietary/confidential information provided in response to the solicitation.

Contact me directly with any questions.

Sincerely,
Anthony Chin

Procurement Commodities Team
anthonyc@slac.stanford.edu
SLAC National Accelerator Laboratory
2575 Sand Hill Road
Menlo Park, CA 94025

Opportunity closing date

25 September 2024

Value of contract

to be confirmed