United States - FY19 DLA-E Lab Equipment

Description

Added: Jun 05, 2019 2:10 pm

 
The purpose of this Sources Sought Notice is to identify qualified Small Businesses, 8(a) Small Businesses (including Small Disadvantaged Businesses (SDB), Woman-owned Small Businesses (WOSB), Historically Underutilized Business Zone (HUB Zone) Small Businesses, Veteran-Owned Small Businesses (VOSB) and Service-Disabled Veteran-Owned Small Businesses (SDVOSB)) that are interested and capable of providing laboratory equipment.
This Sources Sought Notice covers locations Jacksonville, FL; Piti, Guam; Rota, Cadiz, Spain; Pensacola, FL; Richardson, AK; Okinawa, Japan; Sasebo City, Japan; Kanagawa, Japan; Port Orchard, WA; and Norfolk, VA.
The Government anticipates to award this requirements 26 July 2019
The equipment solicited may include:
 
CLIN 0001: DFSP POINT LOMA, CA - Density Meter
Nomenclature:  Density Meter, Benchtop
Unit of Issue: EA
Quantity:  0001
Description:
Instrument shall adhere to ASTM D4052, Standard Test Method for Density.

Measure reliable and accurate 4 digit density values within 0.0001 g/cm3 and temperature range from 0-100 degrees C.  
Instrument must include API functions in settings.  
Can utilize 110 VAC/60Hz with US-style plug. 
Depth must be equal to or less than 30" to accommodate benchtop available space.  Height and width is unrestricted. 
The equipment shall include a one-year warranty.
Accessory kit including all items needed to utilize and calibrate equipment must be included in the price and shipped with the equipment. 
All instrument documentation (if provided electronically) must be provided via either email or on a CD/DVD.  

This is a brand name or equal requirement (Reference FAR 52.211-6) Reference Anton Paar, Model: DMA-4100M
CLIN 0002: DFSP POINT LOMA, CA - Existent Gum Bath, Jet Fuel
Nomenclature:  Existent Gum Bath, Jet Fuel
Unit of Issue: EA
Quantity: 0001
Description: Shall adhere to ASTM D381, Gum Content in Fuels by Jet Evaporation

Initial on-site installation/calibration/hands-on demonstration within two weeks of the equipment arrival.
Accessory kit including all items needed to utilize and calibrate equipment must be included in the price and shipped with the equipment. 
The equipment shall include a one-year warranty.
Four bath unit with steam and air evaporation capability.
Electrical requirements:  must meet the voltage requirement of either 115 or 220 volts 60Hz with US style electrical plugs to match current building design.
Must have a pressure regulator and an air flowmeter built-in as a single unit.
Dimensions must not exceed: 39" x 27" x 30" to accommodate benchtop space.
All instrument documentation (if provided electronically) must be provided via either email or on a CD/DVD.

This is a brand name or equal requirement (Reference FAR 52.211-6): MFG: Koehler Instruments, Model: K33800.
 
CLIN 0003: DFSP POINT LOMA, CA - Jet and Diesel Fuel Analyzer
Nomenclature: Jet and Diesel Fuel Analyzer
Unit of Issue: EA
Quantity: 0001
Description:
Instrument shall have the capability to test the following: freezing point, viscosity, density, cloud point, and pour point in petroleum liquids by adhering to the test parameters of ASTM D5972, ASTM D7945, ASTM D4052, ASTM D5773 and ASTM D5949. 

Accessory kit including all items needed to utilize and calibrate equipment must be included in the price and shipped with the equipment. 
The equipment shall include a one-year warranty.
Initial on-site installation/calibration/hands-on demonstration within two weeks of the equipment arrival.
Must be able to measure freezing point down to -80 ℃ and viscosity.
Must be able to measure viscosity down to -40 ℃.
Must be able to measure cloud point down to -80 ℃.
Must be able to measure pour point down to -80 ℃.
Electrical requirements: shall meet the voltage/hertz requirement of 100/220v and 50/60hz with NEMA style electrical plugs to match current building design.
All instrument documentation (if provided electronically) must be provided via either email or on a CD/DVD.
Dimensions must be no greater than 22" x 14" to accommodate available space. Height is unrestricted.
No external cooler bath or electrical transformer is allowed.

This is a brand name or equal requirement (Reference FAR 52.211-6) Reference MFG: Phase Technology, Model: JFA-70Xi PC
 
CLIN 0004: DFSP POINT LOMA, CA - SHIPPING
Nomenclature: Shipping
Request third party priority shipping (FEDEX, USP, DHL, USPS, etc)
Applicable to CLIN 0001 to CLIN 0003
Description: Shipping address will be:
FLC San Diego
Petroleum Laboratory
Attn: Digna Feria
619-553-1326
199 Rosecrans St
Bldg 70A
Point Loma Annex
San Diego, CA 92106
 
CLIN 0005: JACKSONVILLE, FL - Centrifuge
Nomenclature:  Centrifuge
Unit of Issue: EA
Quantity:  0001
Description:
Instrument shall adhere to ASTM D893 provide a convenient means of determining sediment and water content in crude oil, fuel oils, middle distillate fuels, and biodiesel.
 Accessory kit including all items needed to utilize and calibrate equipment must be included in the price and shipped with the equipment. 
 The equipment shall include a one-year warranty.
 Initial on-site installation/calibration/hands-on demonstration within two weeks of the equipment arrival.
 Must have capacity for Four (4) oil test centrifuge tubes: long (100mL), short (100mL), pear (100mL), or finger tubes (12.5mL)
 Must accommodate 115V 60 Hz, 7A 230V 50/60 Hz, 3.5A power supply with US-style plug
 All instrument documentation (if provided electronically) must be provided via either email or on a CD/DVD
 Dimensions must be no greater than 36x29x20 in. (91.4x73.7x50.8 cm) and weight of 125 lbs (56.7 kg
This is a brand name or equal requirement (Reference FAR 52.211-6) Reference MFG: Koehler, Centrifuge
 
CLIN 0006: JACKSONVILLE, FL - Emulsion Analyzer
Nomenclature:  Emulsion Analyzer
Unit of Issue: EA
Quantity:  0001
Description: Instrument shall adhere to ASTM D1401, Method for Water Separability of Petroleum Oils
•·         Initial on-site installation/calibration/hands-on demonstration within two weeks of the equipment arrival.
•·         The equipment shall include a one-year warranty.
•·         Accessory kit including all items needed to utilize and calibrate equipment must be included in the price and shipped with the equipment. 
•·         All instrument documentation (if provided electronically) must be provided via either email or on a CD/DVD.
•·         Weight shall not exceed 75 lbs.
•·         Test positions shall accommodate 8.
•·         Automatic timer stop with audible alarm from 1 to 10,000 s.
•·         Bath capacity shall accommodate maximum of 30 liters.
•·         Safety features included are: low level protection, safety cut-off stirrer lift.
•·         Stainless steel stirrer paddle.  No copper.
•·         Electrical requirements shall accommodate  230 V, 50 Hz/60 Hz, 2100 W or 115 V, 50 Hz/60 Hz, 1600 W
•·         Dimensions must be no greater than 440 mm x 440 mm x 700 mm (W x D x H)
This is a brand name or equal requirement (Reference FAR 52.211-6) MFG: Anton PAAR, Model: DH5
 
 
CLIN 0007: JACKSONVILLE, FL - Microbalance
Nomenclature:  Microbalance  
Unit of Issue: EA
Quantity:  0001
Description:  Instrument automatically detects static charges and warns you when your results are out of tolerance
•·         Accessory kit including all items needed to utilize and calibrate equipment must be included in the price and shipped with the equipment. 
•·         The equipment shall include a one-year warranty.
•·         Must accommodate balance capacity of 26 grams with a readability of 0.001 milligram (1 µg) to full capacity.
•·         Accommodate large color touchscreen display that is detachable from the main unit.
•·         Must accommodate 230/115/100 VAC, 50-60 Hz configurable/selectable power supply.
This is a brand name or equal requirement (Reference FAR 52.211-6) MFG: Mettler Toledo XPE26, Model: Micro Balance.
 
CLIN 0008: JACKSONVILLE, FL - Jet and Diesel Fuel Analyzer
Nomenclature: Jet and Diesel Fuel Analyzer
Unit of Issue: EA
Quantity: 0001
Description:
Instrument shall have the capability to test the following: freezing point, viscosity, density, cloud point, and pour point in petroleum liquids by adhering to the test parameters of ASTM D5972, ASTM D7945, ASTM D4052, ASTM D5773 and ASTM D5949. 

Accessory kit including all items needed to utilize and calibrate equipment must be included in the price and shipped with the equipment. 
The equipment shall include a one-year warranty.
Initial on-site installation/calibration/hands-on demonstration within two weeks of the equipment arrival.
Must be able to measure freezing point down to -80 ℃ and viscosity.
Must be able to measure viscosity down to -40 ℃.
Must be able to measure cloud point down to -80 ℃.
Must be able to measure pour point down to -80 ℃.
Electrical requirements: shall meet the voltage/hertz requirement of 100/220v and 50/60hz with NEMA style electrical plugs to match current building design.
All instrument documentation (if provided electronically) must be provided via either email or on a CD/DVD.
Dimensions must be no greater than 22" x 14" to accommodate available space. Height is unrestricted.
No external cooler bath or electrical transformer is allowed.

This is a brand name or equal requirement (Reference FAR 52.211-6) Reference MFG: Phase Technology, Model: JFA-70Xi PC
 
CLIN 0009: JACKSONVILLE, FL - SHIPPING
Nomenclature: Shipping
Request third party priority shipping (FEDEX, USP, DHL, USPS, etc)
Applicable to CLIN 0005 to 0008
Description:
Shipping address will be:
FLC Jacksonville FL
Code 700, Fuel Dept.
8808 Somers Road, Bldg. 56
Jacksonville, FL 32226-2600
ATTN: Rudy Ignacio
Phone number: (904) 696-6556 ext. 400
Email: rudy.ignacio@navy.mil
 
 
CLIN 0010: GUAM - Conductivity Meter  
Nomenclature:  Conductivity Meter
Unit of Issue: EA
Quantity:  0002
Description:  Shall adhere to ASTM D2624

Accessory kit including all items needed to utilize and calibrate equipment must be included in the price and shipped with the equipment
All instrument documentation (if provided electronically) must be provided via either email or on a CD/DVD.
The equipment shall include a one-year warranty.

Electrical requirements: none

Equipped with a detachable stainless steel probe.
Conductivity range from 1 to 2000 in increments of 1 picosiemen per meter (pS/m).

Self-check calibration with field adjustment capability.This is a brand name or equal requirement (Reference FAR 52.211-6) Reference MFG: EMCEE, Model 1152.
 
CLIN 0011: GUAM - SHIPPING
Nomenclature: Shipping
Description: Request third party priority shipping (FEDEX, USP, DHL, USPS, etc)
Applicable to CLIN 0010
Shipping address is:
DFSP Guam
Petroleum Laboratory
NAVSUP Fleet Logistics Center Yokosuka
Guam Area Fuel Division Laboratory C740
Bldg. 1700 Marine Corps Drive    
Piti, Guam   96915
ATTN: Grace Rosier
Phone: 1-671-898-7233
Cell:     1-671-343-4089
 
CLIN 0012: ROTA, SPAIN -  Microseparometer
Nomenclature:  Microseparometer (MSEP)
Unit of Issue: EA
Quantity:  0001
Description:  Shall adhere to ASTM D3948, Determining Water Separation Characteristics.

Accessory kit including all items needed to utilize and calibrate equipment must be included in the price and shipped with the equipment. 
All instrument documentation (if provided electronically) must be provided via either email or on a CD/DVD.

The equipment shall include a one-year warranty.
Shall be portable and contain a rechargeable battery.
Shall include: clear glass vial, turbidimeter, a mechanical mixer, plastic syringe and disposable coalescer filter.
Electrical requirements:  must meet the voltage requirement of either 115 or 220 volts 60Hz with US style electrical plugs to match current building design.
Weight shall not exceed 45 pounds.

This is a brand name or equal requirement (Reference FAR 52.211-6) MFG: Emcee, Model: 1140 Micro-Separometer.
 
 
CLIN 0013: ROTA, SPAIN - Density Meter
Nomenclature:  Density Meter, Benchtop
Unit of Issue: EA
Quantity:  0001
Description:
Instrument shall adhere to ASTM D4052, Standard Test Method for Density.

Measure reliable and accurate 4 digit density values within 0.0001 g/cm3 and temperature range from 0-100 degrees C.  
Instrument must include API functions in settings.  
Can utilize 110 VAC/60Hz with US-style plug. 
Depth must be equal to or less than 30" to accommodate benchtop available space.  Height and width is unrestricted. 
The equipment shall include a one-year warranty.
Accessory kit including all items needed to utilize and calibrate equipment must be included in the price and shipped with the equipment. 
All instrument documentation (if provided electronically) must be provided via either email or on a CD/DVD.  

This is a brand name or equal requirement (Reference FAR 52.211-6) Reference Anton Paar, Model: DMA-4100M
 
CLIN 0014: ROTA, SPAIN - SHIPPING
Nomenclature: Shipping
Description: Request third party priority shipping (FEDEX, USP, DHL, USPS, etc)
Applicable to CLIN 0012 to CLIN 0013
Shipping address will be:
NAVSUP FLC Rota
ATTN: Eduardo Docarmo
Phone number 34-956-82-4215
Fuels Laboratory building 55
Rota, Cadiz, Spain 11530
 
CLIN 0015: PENSACOLA, FL - Ellipsometer
Nomenclature:  Ellipsometer, Jet Fuel
Unit of Issue: EA
Quantity:  0001
Description:
Instrument shall adhere to ASTM D3241, Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels, Annex A3 "Rating of D3241Heater Tubes - Ellipsometric Method." 
•·         Shallmeasure deposit thickness ranging 0 to 350nm.
•·         Can utilize either 115 or 220 volts 50/60Hz with NEMA style electrical plugs to match current building design. 
•·         Dimensions are unrestricted. 
This is a brand name or equal requirement (Reference FAR 52.211-6) Reference MFG Falex, Model: 430 ETR...According to ASTM D-3241 page 13 footnote 12, only Falex Corporation makes the approved equipment.  See attachment.
 
 
CLIN 0016: PENSACOLA, FL - Existent Gum Bath, Jet Fuel
Nomenclature:  Existent Gum Bath, Jet Fuel
Unit of Issue: EA
Quantity: 0001
Description: Shall adhere to ASTM D381, Gum Content in Fuels by Jet Evaporation

Initial on-site installation/calibration/hands-on demonstration within two weeks of the equipment arrival.
Accessory kit including all items needed to utilize and calibrate equipment must be included in the price and shipped with the equipment. 
The equipment shall include a one-year warranty.
Four bath unit with steam and air evaporation capability.
Electrical requirements:  must meet the voltage requirement of either 115 or 220 volts 60Hz with US style electrical plugs to match current building design.
Must have a pressure regulator and an air flowmeter built-in as a single unit.
Dimensions must not exceed: 39" x 27" x 30" to accommodate benchtop space.
All instrument documentation (if provided electronically) must be provided via either email or on a CD/DVD.

This is a brand name or equal requirement (Reference FAR 52.211-6): MFG: Koehler Instruments, Model: K33800.
 
CLIN 0017: PENSACOLA, FL -SHIPPING
Nomenclature: Shipping
Description: Direct shipment to Pensacola Laboratory, FL
Request third party priority shipping (FEDEX, USP, DHL, USPS, etc)
Applicable to CLIN 0015 to CLIN 0016.
Shipping address is:
NAVY FUELS DEPT
ATTN: Don Langner
Phone: 850-452-9817
690 SAN CARLOS RD
PENSACOLA, FL 32508
 
 
CLIN 0018: ALASKA - Emulsion Analyzer
Nomenclature:  Emulsion Analyzer
Unit of Issue: EA
Quantity:  0001
Description: Instrument shall adhere to ASTM D1401, Method for Water Separability of Petroleum Oils

Initial on-site installation/calibration/hands-on demonstration within two weeks of the equipment arrival.

The equipment shall include a one-year warranty.
Accessory kit including all items needed to utilize and calibrate equipment must be included in the price and shipped with the equipment. 
All instrument documentation (if provided electronically) must be provided via either email or on a CD/DVD.
Weight shall not exceed 75 lbs.
Test positions shall accommodate 8.
Automatic timer stop with audible alarm from 1 to 10,000 s.
Bath capacity shall accommodate maximum of 30 liters.
Safety features included are: low level protection, safety cut-off stirrer lift.
Stainless steel stirrer paddle.  No copper.
Electrical requirements shall accommodate  230 V, 50 Hz/60 Hz, 2100 W or 115 V, 50 Hz/60 Hz, 1600 W
Dimensions must be no greater than 440 mm x 440 mm x 700 mm (W x D x H)

This is a brand name or equal requirement (Reference FAR 52.211-6) MFG: Anton PAAR, Model: DH5
 
CLIN 0019: DLA ALASKA LAB - Density Meter
Nomenclature:  Density Meter, Benchtop
Unit of Issue: EA
Quantity:  0001
Description:
Instrument shall adhere to ASTM D4052, Standard Test Method for Density.

Measure reliable and accurate 4 digit density values within 0.0001 g/cm3 and temperature range from 0-100 degrees C.  
Instrument must include API functions in settings.  
Can utilize 110 VAC/60Hz with US-style plug. 
Depth must be equal to or less than 30" to accommodate benchtop available space.  Height and width is unrestricted. 
The equipment shall include a one-year warranty.
Accessory kit including all items needed to utilize and calibrate equipment must be included in the price and shipped with the equipment. 
All instrument documentation (if provided electronically) must be provided via either email or on a CD/DVD.  

This is a brand name or equal requirement (Reference FAR 52.211-6) Reference Anton Paar, Model: DMA-4100M
 
CLIN 0020: ALASKA - SHIPPING
Nomenclature: Shipping
Applicable to CLIN 0018 to CLIN 0019.
Shipping address is:
DLA Energy Alaska
Petroleum Laboratory
ATTN: Robert Tate
BLDG 986 Warehouse Street
JBER-Richardson, AK 99506
Phone: 907-384-7180
Cell:       907-351-1228
Fax:       907-384-1092
 
CLIN 0021: OKINAWA, JAPAN - Emulsion Analyzer
Nomenclature:  Emulsion Analyzer
Unit of Issue: EA
Quantity:  0001
Description: Instrument shall adhere to ASTM D1401, Method for Water Separability of Petroleum Oils

Initial on-site installation/calibration/hands-on demonstration within two weeks of the equipment arrival.

The equipment shall include a one-year warranty.
Accessory kit including all items needed to utilize and calibrate equipment must be included in the price and shipped with the equipment. 
All instrument documentation (if provided electronically) must be provided via either email or on a CD/DVD.
Weight shall not exceed 75 lbs.
Test positions shall accommodate 8.
Automatic timer stop with audible alarm from 1 to 10,000 s.
Bath capacity shall accommodate maximum of 30 liters.
Safety features included are: low level protection, safety cut-off stirrer lift.
Stainless steel stirrer paddle.  No copper.
Electrical requirements shall accommodate  230 V, 50 Hz/60 Hz, 2100 W or 115 V, 50 Hz/60 Hz, 1600 W
Dimensions must be no greater than 440 mm x 440 mm x 700 mm (W x D x H)

This is a brand name or equal requirement (Reference FAR 52.211-6) MFG: Anton PAAR, Model: DH5
 
CLIN 0022: DLA OKINAWA LAB, JAPAN - Net Heat of Combustion
Nomenclature:  Net Heat of Combustion, Automatic Isoperibol Calorimeter
Unit of Issue: EA
Quantity:  0001
Description:
Shall adhere to ASTM D4809, Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter.

Initial on-site installation/calibration/hands-on demonstration within 12 weeks of the equipment arrival.
Accessory kit including all items needed to utilize and calibrate equipment must be included in the price and shipped with the equipment
All instrument documentation (if provided electronically) must be provided via either email or on a CD/DVD.
The equipment shall include a one-year warranty.
Electrical requirements must meet the voltage requirement of 230 Volts/50Hz with NEMA style electrical plugs.

Dimensions to fit laboratory allotted space/ 42w x 46d x 51h (cm)
Instrument must be capable of Precision Classification to 0.10%
Four vessel capability with oxygen "bombs"
Instrument must be capable of testing a minimum of 6 per hour
Temperature resolution of 0.0001 °C
System shall include software, PC, and accessories to support test method application.

This is a brand name or equal requirement (Reference FAR 52.211-6) MFG: Parr, 6400 Calorimeter
 
CLIN 0023: OKINAWA, JAPAN - SHIPPING
Nomenclature: Shipping
Description:
Okinawa, Japan
Shipping address will be:
Request FEDEX or USPS or UPS priority shipping
Applicable to CLIN 0022 only.
Defense Logistics Agency Energy Laboratory
ATTN: Arlinda Adderley
Phone: 080-8593-5577
Email. DLAEnergyOkinawa.lab@dla.mil
 
CLIN 0024: DFSP SAESBO, JAPAN - FAME Tester
Nomenclature:  FAME Tester
Unit of Issue: EA
Quantity:  0001
Description:
Shall adhere to ASTM D7797, IP 583 and ASTM D7963

Initial on-site installation/calibration/hands-on demonstration within two weeks of the equipment arrival.
Accessory kit including all items needed to utilize and calibrate equipment must be included in the price and shipped with the equipment. 
All instrument documentation (if provided electronically) must be provided via either email or on a CD/DVD.
The equipment shall include a one-year warranty.
Measurement range: 10-150 ppm (mg/kg) FAME in Jet Fuels and 20 mg/kg to 20% FAME in Distillate & Residual Fuels
Sample size shall not exceed 50ml
Temperature range: 5 to 35°C maximum
Electrical requirements shall meet the voltage/ available in volts 50Hz.
Dimensions to fit laboratory allotted space /equipment size must be less than 56cm height x 38cm wide x 42cm depth to accommodate available space.
Weight must not exceed 75lbs.

This is a brand name or equal requirement (Reference FAR 52.211-6) Reference MFG Seta Analytics, Fiji MF, Model SA5200-0.
 
CLIN 0025: DFSP SAESBO, JAPAN - Jet and Diesel Fuel Analyzer
Nomenclature: Jet and Diesel Fuel Analyzer
Unit of Issue: EA
Quantity: 0001
Description:
Instrument shall have the capability to test the following: freezing point, viscosity, density, cloud point, and pour point in petroleum liquids by adhering to the test parameters of ASTM D5972, ASTM D7945, ASTM D4052, ASTM D5773 and ASTM D5949. 

Accessory kit including all items needed to utilize and calibrate equipment must be included in the price and shipped with the equipment. 
The equipment shall include a one-year warranty.
Initial on-site installation/calibration/hands-on demonstration within two weeks of the equipment arrival.
Must be able to measure freezing point down to -80 ℃ and viscosity.
Must be able to measure viscosity down to -40 ℃.
Must be able to measure cloud point down to -80 ℃.
Must be able to measure pour point down to -80 ℃.
Electrical requirements: shall meet the voltage/hertz requirement of 100/220v and 50/60hz with NEMA style electrical plugs to match current building design.
All instrument documentation (if provided electronically) must be provided via either email or on a CD/DVD.
Dimensions must be no greater than 22" x 14" to accommodate available space. Height is unrestricted.
No external cooler bath or electrical transformer is allowed.

This is a brand name or equal requirement (Reference FAR 52.211-6) Reference MFG: Phase Technology, Model: JFA-70Xi PC
 
CLIN 0026: DFSP SAESBO, JAPAN - SHIPPING
Nomenclature: Shipping
Description: Direct shipment to DFSP Sasebo, Japan
Applicable to CLIN 0024 to CLIN 0025.
Shipping address will be:
FLC Yokosuka Sasebo
Fuel Terminals Laboratory
Mubanchi Akasaki-cho, Sasebo City, Nagasaki Pref, Japan
857-0064
ATTN: Megumi Tanaka
Phone number: 81-956-50-4134
Email megumi.tanaka.ja@fe.navy.mil
 
 
 
 
CLIN 0027: DFSP HAKOZAKI, JAPAN - Jet and Diesel Fuel Analyzer
Nomenclature: Jet and Diesel Fuel Analyzer
Unit of Issue: EA
Quantity: 0001
Description:
Instrument shall have the capability to test the following: freezing point, viscosity, density, cloud point, and pour point in petroleum liquids by adhering to the test parameters of ASTM D5972, ASTM D7945, ASTM D4052, ASTM D5773 and ASTM D5949. 

Accessory kit including all items needed to utilize and calibrate equipment must be included in the price and shipped with the equipment. 
The equipment shall include a one-year warranty.
Initial on-site installation/calibration/hands-on demonstration within two weeks of the equipment arrival.
Must be able to measure freezing point down to -80 ℃ and viscosity.
Must be able to measure viscosity down to -40 ℃.
Must be able to measure cloud point down to -80 ℃.
Must be able to measure pour point down to -80 ℃.
Electrical requirements: shall meet the voltage/hertz requirement of 100/220v and 50/60hz with NEMA style electrical plugs to match current building design.
All instrument documentation (if provided electronically) must be provided via either email or on a CD/DVD.
Dimensions must be no greater than 22" x 14" to accommodate available space. Height is unrestricted.
No external cooler bath or electrical transformer is allowed.

This is a brand name or equal requirement (Reference FAR 52.211-6) Reference MFG: Phase Technology, Model: JFA-70Xi PC
 
CLIN 0028: DFSP HAKOZAKI, JAPAN - SHIPPING
Nomenclature: Shipping
Request third party priority shipping (FEDEX, USP, DHL, USPS, etc)
Applicable to CLIN 0027.
Shipping address is:
U.S. FISC Yokosuka
Hakozaki Terminal Laboratory
ATTN: Gerald Archibald
Email: Gerald.Archibald@fe.navy.mil
Phone: 046-816-0579
Mubanchi Nagaura-cho, Yokosuka City, Kanagawa, Japan
 
 
CLIN 0029: DFSP MANCHESTER, Puget Sound, WA - Jet and Diesel Fuel Analyzer
Nomenclature: Jet and Diesel Fuel Analyzer
Unit of Issue: EA
Quantity: 0001
Description:
Instrument shall have the capability to test the following: freezing point, viscosity, density, cloud point, and pour point in petroleum liquids by adhering to the test parameters of ASTM D5972, ASTM D7945, ASTM D4052, ASTM D5773 and ASTM D5949. 

Accessory kit including all items needed to utilize and calibrate equipment must be included in the price and shipped with the equipment. 
The equipment shall include a one-year warranty.
Initial on-site installation/calibration/hands-on demonstration within two weeks of the equipment arrival.
Must be able to measure freezing point down to -80 ℃ and viscosity.
Must be able to measure viscosity down to -40 ℃.
Must be able to measure cloud point down to -80 ℃.
Must be able to measure pour point down to -80 ℃.
Electrical requirements: shall meet the voltage/hertz requirement of 100/220v and 50/60hz with NEMA style electrical plugs to match current building design.
All instrument documentation (if provided electronically) must be provided via either email or on a CD/DVD.
Dimensions must be no greater than 22" x 14" to accommodate available space. Height is unrestricted.
No external cooler bath or electrical transformer is allowed.

This is a brand name or equal requirement (Reference FAR 52.211-6) Reference MFG: Phase Technology, Model: JFA-70Xi PC
 
CLIN 0030: DFSP MANCHESTER, Puget Sound, WA - SHIPPING
Nomenclature: Shipping
Description: Puget Sound, WA
Shipping address will be:
Request third party priority shipping (FEDEX, USP, DHL, USPS, etc)
Applicable to CLIN 0029.
FLC Puget Sound
Manchester Fuel Department
7501 Beach Drive East
Port Orchard, WA 98366
Attn: Don Tailleur
Email: donald.tailleur@navy.mil
Phone: 360 476-9561
 
CLIN 0031: NAVY NORFOLK LAB - Jet and Diesel Fuel Analyzer
Nomenclature: Jet and Diesel Fuel Analyzer
Unit of Issue: EA
Quantity: 0001
Description:
Instrument shall have the capability to test the following: freezing point, viscosity, density, cloud point, and pour point in petroleum liquids by adhering to the test parameters of ASTM D5972, ASTM D7945, ASTM D4052, ASTM D5773 and ASTM D5949. 

Accessory kit including all items needed to utilize and calibrate equipment must be included in the price and shipped with the equipment. 
The equipment shall include a one-year warranty.
Initial on-site installation/calibration/hands-on demonstration within two weeks of the equipment arrival.
Must be able to measure freezing point down to -80 ℃ and viscosity.
Must be able to measure viscosity down to -40 ℃.
Must be able to measure cloud point down to -80 ℃.
Must be able to measure pour point down to -80 ℃.
Electrical requirements: shall meet the voltage/hertz requirement of 100/220v and 50/60hz with NEMA style electrical plugs to match current building design.
All instrument documentation (if provided electronically) must be provided via either email or on a CD/DVD.
Dimensions must be no greater than 22" x 14" to accommodate available space. Height is unrestricted.
No external cooler bath or electrical transformer is allowed.

This is a brand name or equal requirement (Reference FAR 52.211-6) Reference MFG: Phase Technology, Model: JFA-70Xi PC
 
CLIN 0032: NAVY NORFOLK LAB - SHIPPING
Nomenclature: Shipping
Unit of issue: EA
Description: Norfolk, VA
Applicable to CLIN 0041 only
Shipping address is:
Mid-Atlantic Regional Test Laboratory
Building 276
Norfolk Naval Shipyard, VA
POC Makeena Stephens
(757) 444-2761

Opportunity closing date

19 June 2019

Value of contract

to be confirmed