United States - 17--slide assembly

Description

CONTACT INFORMATION|4|N792.10|T2Q|215-697-9948|KIMBERLY.FLORES12.CIV@US.NAVY.MIL|
ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19||||||||||||||||||||
HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|8|X||||||||
INSPECTION AND ACCEPTANCE OF SUPPLIES|26|X||||||||||||X||||||||||||||
TIME OF DELIVERY (JUNE 1997)|20|||||||||||||||||||||
STOP-WORK ORDER (AUG 1989)|1||
WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|INVOICE AND RECEIVING (COMBO) TYPE||TBD|N00383|TBD|TBD|SEE SCHEDULE|TBD|||||||||
NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1||
VALUE ENGINEERING (JUN 2020)|3||||
EQUAL OPPORTUNITY (SEP 2016)|2|||
INTEGRITY OF UNIT PRICES (NOV 2021)|1||
WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUN 2003)|6|12 MONTHS|60 Days after discovery of defect.|||||
WARRANTY OF DATA - BASIC (MAR 2014)|2|||
EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (JUN 2020)|2|||
TRANSPORTATION OF SUPPLIES BY SEA (OCT 2024)|2|||
FIRST ARTICLE APPROVAL--GOVERNMENT TESTING (SEP 1989)|7||||||||
BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11||||||||||||
LIMITATION OF LIABILITY--HIGH-VALUE ITEMS (FEB 1997)|1||
LIMITATIONS ON PASS-THROUGH CHARGES (JUN 2020)|1||
NOTICE OF TOTAL SMALL BUSINESS SET-ASIDE (OCT 2020)(DEVIATION 2020-O0008)|1||
ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (OCT 2024)|13||||||||||||||
BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5||||||
BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM (FEB 2024)|1||
ANNUAL REPRESENTATIONS AND CERTIFICATIONS (MAY 2024)|12|336413|1250|||||||||||
FACSIMILE PROPOSALS (OCT 1997)|1||
NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||x|
EVALUATION OF FIRST ARTICLE TESTING|3||||
This solicitation is for made new manufacture spare parts.
The Government intends to make a single award to the eligible, responsible,technically acceptable offeror whose offer, conforming to the solicitation, isdetermined most advantageous to the Government, price, capacity, and deliveryconsidered.
NAVSUP WSS Requests proposals submitted in response to this solicitation remain valid for a minimum of 120 days following submission.
All contractual documents related to the instant procurement are considered tobe "issued" by the Government when copies are either deposited in the mail,transmitted by facsimile, or sent by other electronic commerce methods, such as email. The Governments
acceptance of the contractors proposal constitutes
bilateral agreement to "issue" contractual documents as detailed herein.
\
1. SCOPE
1.1 . Markings shall be in accordance with MIL-STD-130.
1.2 PRE-AWARD / POST AWARD REQUIREMENTS:
Due to the critical use of this item and its quality history, a pre-award survey and post-award conference may be required for all new manufacturers. For all previous sources, a post-award conference may be recommended.
1.3 The components being acquired under this solicitation have been classified as Flight Critical requiring engineering source approval by the Naval Air Systems Command. Only those companies who have submitted requests for source approval and been approved
will be eligible for award under this solicitation. Any company not previously approved may submit a Source Approval Request to the contracting officer, Naval Inventory Control Point, (See Block 10 of the
SF33 for name and code). The Source Approval Request shall contain the following documentation and shall be submitted by the closing date of this solicitation:
(A) Copy of complete configuration drawings for a similar item(s) which your company has produced within the past three years, including test procedures for which your company (1) has been qualified to manufacture and (2) which is similar, i.e., requires the
same materials, manufacturing processes, inspections, tolerances and similar application as the item(s) for which you are seeking approval.
(B) Copy of the complete process/operation sheets used to manufacuture the similar item, including but not limited to, detailed shop sketches. These plans must note those operations and processes performed by subcontractors/ vendors.
(C) Complete copies of purchase orders, shipping documents, etc. that document delivery of production quantities of the part to the Original Equipment Manufacturer or Military service. Provide the most recent copies of the documents.
(D) A detailed comparative analysis of the differences/similarities between the similar part and the part(s) for which you are seeking approval. This analysis should include materials, configuration, tolerances, process requirements, dimensions, castings,
forgings, etc.
(E) Copy of inspection method sheets used in the manufacturing and at final inspection. These sheets should include actual tolerance, print requirements, inspection devices, sources performing the operation and level of inspection. Critical characteristics
should be discernible from all other characteristics.
The above requirements are a subset of requirements specified in the ASO
Source Approval Information Brochure dated January 1995. The submission of this data subset is contingent upon and in consideration of the submitting contractor meeting all other requirements specified in this solicitation to include a bilateral agreement with
MDA which includes availability of complete data, MRB disposition, etc. Any company not having such agreement, but desiring to seek engineering source approval, will be required to submit data meeting all requirements of the ASO/NAVICP Source Approval
Brochure.
1.4 Sampling rates (AQLs) indicated below shall be used in accordance with
ANSI Z1.4 for Single Sampling and a General Inspection Level of II.
1.5 In addition to the 100% PCO Mandatory, critical and major characteristics,
attributes for plating, hardness and non-destructive testing will be inspected
one hundred percent.
1.6 Contractor shall develop a system for identification of individual
piece parts for traceability purposes. Markings shall not be permanent.
1.7 An AQL of 1.5 will be used for Class 3 threads and dimensions, and
geometric feature controls with a tolerance range of .010 or less.
1.8 For minor characteristics, a sampling rate determined by the contractor
and subject to QAR approval will be used.
1.9 The material covered in this contract/purchase order will be used in a
crucial shipboard system enabling the launch and/or recovery of aircraft. The use of incorrect or defective material would create a high probability of failure resulting in a serious personnel injury, loss of life, loss of vital
shipboard systems or loss of aircraft. Therefore,the material has been
designated as Critical material and special control procedures are invoked
to ensure receipt of correct material.
1.10 Articles to be furnished hereunder shall be manufactured, tested and inspected in accordance with ;NAWC LAKEHURST; drawing number ( ;80020; ) ;510872-2; , Revision ;N; and all details and specifications referenced therein.
1.11 Unless expressly provided for elsewhere in this clause, equipment such as fixtures, jigs, dies, patterns, mylars, special tooling, test equipment, or any other manufacturing aid required for the manufacture and/or testing of the subject item(s) will not
be provided by the Government or any other source and is the sole responsibility of the contractor. The foregoing applies notwithstanding any reference to such equipment or the furnishing thereof that may be contained in any drawing or referenced
specification.
1.12 If MIL-STD-454 is referenced in the drawings or in the specification, the contractor is expected to show compliance with IPC/EIAJ-STD-001C.
2. APPLICABLE DOCUMENTS
DRAWING DATA=B408573 |80020| F| |A| | | |
DRAWING DATA=MPR 1221 |80020| T| |D| | | |
DRAWING DATA=MPR 1222 |80020| A| |D| | | |
DRAWING DATA=MPR 1223 |80020| C| |D| | | |
DRAWING DATA=323195 |80020| E| |A| | | |
DRAWING DATA=323196 |80020| E| |A| | | |
DRAWING DATA=416328 |80020| G| |A| | | |
DRAWING DATA=416330 |80020| C| |D| | | |
DRAWING DATA=416332 |80020| C| |A| | | |
DRAWING DATA=418772 |80020| D| |A| | | |
DRAWING DATA=420340 |80020| D| |D| | | |
DRAWING DATA=510875 |80020| F| |C| | | |
DRAWING DATA=511224 |80020| J| |D| | | |
DRAWING DATA=514822 |80020| M| |D| | | |
DRAWING DATA=514823 |80020| G| |D| | | |
DRAWING DATA=514824 |80020| G| |D| | | |
3. REQUIREMENTS - NOT APPLICABLE
4. QUALITY ASSURANCE
Unique Requirements:
1. All records pertaining to ALRE CSI/CAI manufacture and inspection/test shall be provided to the ALRE CognizantTechnical Authority. All records shall be maintained by LKE QA and by the manufacturer for a period of seven years.
2. Interim Inspection Requirements: The following item(s) requires an Interim Inspection at the contractor's location:
a. PN 514822-1, Hook (CSI):
i. Witness of magnetic particle inspection of Area "X" and Section "D-D" of Drawing 514822 prior to chromium plating.
ii. Witness of dimensional inspection in Area "X" and Section "D-D" of Drawing 514822 prior to chromium plating.
iii. Witness of hardness testing in Area "X" and Section "D-D" of Drawing 514822 prior to chromium plating.
3. ALRE CSI parts require certification:
a. When certified, an ALRE part is marked with a Material Identification Code (MIC). NAWCADLKE QA will provide the MIC to DCMA if the component is source accepted, and after receipt of all associated data. Application of MIC shall be in the same methodology as
the drawing note for part marking, and in same area as part marking (next to, above, or below).
4. Receipt inspection and Certification of Sub-Components:
a. P/N 514822-1 shall be certified at Lakehurst.
5. Receipt Inspection and Certification of the Top Assembly:
a. The receipt Inspection and Certification of the Top Assembly, P/N 510872-2, shall occur at Lakehurst during the final inspection.
6. Contractor Assist and Part Marking:
a. The contractor shall assist on the conduct of the inspections (both final and interim) required that are necessary to certify the critical items specified herein. The contractor shall provide adequate facilities, inspection equipment, and skilled personnel,
to support the NAWCADLKE Inspector in the conduct of the interim inspection(s). The contractor shall provide gauges, tools, fixtures, and jigs necessary to perform the inspections. The contractor shall also provide sufficient rigging/material handling services
and manpower to setup/configure/operate equipment & machines used to accomplish the inspection task. This contractor assist requirement shall be applicable to 100% of the production quantities. As part of the MRI process, the NAWCADLKE QA representative will
provide, in writing, a certification number along with direction for marking the Critical Safety Item (CSI).
QUALITY ASSURANCE REQUIREMENTS
1. The solicitation/contract shall contain the NAWCADLKE inspection surveillance clause as follows:
a. N/A
b. Due to the critical nature of this item, it is necessary to conduct in-process inspections on critical component features, attributes, or manufacturing processes. The contractor agrees to notify Roy Janney, Roy.a.janney.civ@us.navy.mil, of the NAWC QA
section Code, BL41600, Lakehurst, NJ 08733-5035 and the PCO when material is scheduled for the interim inspection(s) that are identified herein. This notice shall afford the NAWCADLKE QA representative the option of being present during the inspection. A
minimum of seven (7) working days is required to arrange the surveillance visit. Notification shall include the following information: Company Name, Cage Code, Phone number, Fax number, Contract number, Point of Contact, Part Nomenclature,Part Number, NIIN,
Type of Inspection, and Quantity of parts.
2. The contractor shall perform Quality Conformance and Lot Sampling Inspection for all associated features that are present in the drawings and specifications:
a. Features/attributes/requirements classified as Critical and Major on the drawing(s) or within the technical specification shall be inspected and shall have the actual dimensions documented 100%;
b. Attributes for plating, hardness, and non-destructive testing shall be inspected 100%;
c. Class 3 Threads, dimensions, and geometric feature controls with a tolerance range of .010 or less shall be inspected using an AQL of 1.5 and the General Inspection Level II as defined by ANSI Z1.4.
d. Minor Characteristics: Sampling shall be inspected using an AQL of 4.0 and the General Inspection Level II as defined by ANSI Z1.4.
3. The material covered in this contract/purchase order will be used in a crucial shipboard system supporting the launch and/or recovery of aircraft. The use of incorrect or defective material would create a high probability of failure resulting in a serious
personnel injury, loss of life, loss of vital shipboard systems, or loss of aircraft. Therefore, the material has been designated as Critical Safety Item (CSI) material and special control procedures are invoked to ensure receipt of correct material.
4. First Article Testing:
a. First Article testing by the Government is required for this item of ALRE/SE.
b. First Article samples, all certifications, test reports, and in-process inspection documents needed to substantiate product quality shall be forwarded to the Naval Air Warfare Center Aircraft Division, Code BL41600 B148, Hwy #547, Lakehurst, NJ 08733-5125
(Attention: Drew Flast).
c. First Article samples will be evaluated within 45 working days after the date of receipt for sample quantities.
d. First Article sample quantities is 1 (one); delivered in the uncoated condition. First Article results and disposition recommendations will be provided to the PCO via letter.
e. Estimated test costs are $5000.
5. Production Lot Special Tests: N/A
6. For purposes of this TDR, the term NDT shall refer to the following methods: MT - Magnetic Particle Testing, PT - Penetrant Inspection, UT - Ultrasonic Testing, RT - Radiographic Testing, and VT - Visual Testing.
7. Companies performing NDT shall be NADCAP accredited, or a laboratory accredited by one of the organizations listed below as satisfying ISO 17025 (General requirements for the competence of testing and calibration laboratories). NDT certificates shall be bear
the symbols of accreditation and the accreditation body.
a. American Association for Laboratory Accreditation (A2LA)
b. ANSI National Accreditation Board (ANAB)
c. International Accreditation Service, Inc (IAS)
d. National Voluntary Laboratory Accreditation Program (NVLAP)
e. Perry Johnson Laboratory Accreditation, Inc (PJLA)
f. Canadian Association for Laboratory Accreditation Inc. (CALA)
g. Standards Council of Canada (SCC)
4.1 Review documentation as provided under DD 1423 requirements.
4.2 CRITICAL MANUFACTURING PROCESSES
( ;APPLIES; ) HEAT TREAT
( ;APPLIES; ) WELDING
( ;N/A; ) CADMIUM PLATING
( ;N/A ; ) ENGINEERING CHROME PLATING
( ;APPLIES; ) NICKEL CHROME PLATING
( ;N/A; ) CASTING(S)
( ;N/A; ) FORGING(S)
( ;APPLIES; ) MPR (MATERIAL PROCESSING REQUIREMENTS)
4.3 The test to be performed under the First Article approval clause (FAR 52.209-3) of the contract are listed below
4.3.1 Dimensional test (special)
;CLOSE MACHINE TOLERANCES.;
4.3.2 Requirements of:
;LKE DRAWING PACKAGE;
4.3.3 Form
;APPLIES;
4.3.4 Fit
;N/A;
4.3.5 Function
;N/A;
4.3.6 Compliance with drawing ( ;80020; ) ;510872; , Revision ;REV N ; and specifications referenced therein.
4.4 In addition to the above tests, the First Article(s) to be inspected hereunder shall also be subjected to those tests which will demonstrate that the article(s) comply with the contract requirements
4.5 The contractor shall be responsible for providing the necessary parts and repair of the First Article Sample(s) during inspection
4.6 The contractor shall notify the PCO, ACO, and QAR fourteen (14) days prior to conducting the First Article test so that the Government may witness such testing.
4.6.1 The QAR shall be present to witness all First Article Testing.
4.6.2 The following additional personnel shall witness the First Article Testing: ;Roy Janney NAWCADLKE QA / Tel: (732)-323-2834
E-mail: roy.a.janney.civ@us.navy.mil;
4.7 Disposition of FAT samples
4.7.1 ;N/A; Sample(s) may be destroyed during testing.
4.7.2 ;APPLIES; Unless otherwise provided for in the contract, sample(s) shall remain at the contractor and may be considered as production items under the contract provided the sample(s) can be refurbished to ready for issue condition and provided the
sample(s) have inspection approval of the cognizant DCMC QAR. Sample(s) may be shipped as production items only after all other units required under the contract have been produced and are ready for shipment.
4.8 Test Sample Coating Instructions
4.8.1 Samples are to be unpainted. Corrosive areas are to be coated with a light preservative if required.
4.9 Notice to Government of Testing at the contractors facility.
4.9.1 FAR 52.209-3 applies
(A) The contractor shall present ;ONE; ; unit(s) of the following CAGE( ;80020; ; ), Part Number ;510872-2; ; , Revision ;REV N; ; as specified in this contract. At least fourteen (14) calendar days before the beginning of the First Article testing, the
contractor shall notify the contracting officer, in writing, of the time and location of the testing so that the Government may witness the tests.
(B) The contractor shall submit the First Article Test Report within 15 calendar days from the date of testing to: ;PCO; ;
The contractor shall mark the report "First Article Test Report" and cite the contract number and lot/item number. Review documentation as provided under the DD1423 requirements.
(C) Within 45 calendar days after the Government inspects the First Article, the contracting officer shall notify the contractor, in writing, of the approval, conditional approval, or disapproval of the First Article. The notice of approval, conditional
approval, or disapproval shall not relieve the contractor from complying with all requirements of the specifications and all other terms and conditions of this contract. A notice of conditional approval shall state any further action required of the
contractor. A notice of disapproval shall cite reasons for disapproval.
(D) If the First Article is disapproved, the contractor, upon Government request shall repeat any or all First Article Tests. After each request for additional tests, the contractor shall make any necessary changes, modifications, or repairs to the First
Article or select another First Article for testing. All costs related to these tests are to be borne by the contractor, including any and all costs for additional tests following a disapproval. The contractor shall then conduct the tests and deliver another
report to the Government under the terms and conditions and within the time specified in paragraph B above. The Government reserves the right to require an equitable adjustment of the contract price for any extension of the delivery schedule or for any
additional costs to the Government related to these tests.
(E) If the contractor fails to present any First Article on time, or the contracting officer disapproves any First Article, the contractor shall be deemed to have failed to make delivery within the meaning of the default clause of this contract.
(F) Unless otherwise provided in the contract, and if the approved First Article is not consumed or destroyed in testing, the contractor may deliver the approved First Article as part of the contract quantity if it meets all contract requirements for
acceptance.
(G) If the Government does not act within the time specified in paragraph (C) above the contracting officer, shall, upon timely written request from the contractor, equitably adjust under the Changes clause of this contract the delivery or performance dates
and/or the contract price, and any other contractual term affected by the delay.
(H) Before First Article Approval, the acquisition of materials or components for, or the commencement of production or, the balance of the contract quantity is at the sole risk of the contractor. Before First Article approval, the costs thereof shall not be
allocated to this contract for 1) progress payments, or 2) termination settlements if the contract is terminated for the convenience of the Government. The contractor is responsible for providing operating and maintenance instructions, spare parts, and repair
of the First Article during any First Article test.
(I) The contractor shall produce both the First Article and the production quantity at the same facility and shall submit a certification to the effect with each First Article.
(J) The test report (2 copies) shall be in accordance with MIL-STD-831, unless otherwise specified on the DD1423, and shall be submitted via the cognizant DCMC to NAVSUP, ATTN: (Cite name and code in Block 10.a of the SF33). The DCMC shall provide comments on
Form DD1222 (2 copies) which shall be forwarded with the test report. Approval of the test report is the PCO's responsibility. Upon notification of approval, condition approval, the ACO shall execute the DD250 to indicate Government acceptance of the test
report.
4.10 Alternate Offers - Waiver of First Article Approval Requirements. (The following provisions supersede any waiver of First Article Approval Requirements terms set forth in clause 52.209-3 or 52.209-4 as appropriate)
(A) Unless otherwise specified in the solicitation, NAVSUP WSS reserves the right to waive the First Article Approval Requirements specified herein for offerors who have previously furnished identical production articles accepted by the Government or the
Original Equipment Manufacturer/Prime Manufacturer. An offeror requesting waiver of First Article Requirements shall submit evidence with its offer establishing that:
(I) the last production unit was delivered within three (3) years of the issue date of this solicitation, and
(II) the production location to be used for this requirement is the same as used for the previous production run.
Additionally, the offeror shall submit a certification, to be executed by the officer or employee for the offer, stating that:
(I) the articles to be provided will be produced using the same facilities, processes, sequences of operations and approved subcontractors as those previously delivered and accepted by the Government or the Original Equipment Manufacturer/Prime Manufacturer,
and
(II) the previous production units were manufactured without Material Review Board disposition or waiver/deviation request or rejection of pre-production samples for cause.
(NOTE: This certification concerns a matter within the jurisdiction of an agency of the United States and the making of a false, fictitious, or fraudulent certification may render the maker subject to prosecution under Title 18, United States
Code, Section 1001.)
(B) Offerors requesting waiver of First Article Approval Requirements under the provisions of this clause are cautioned to submit two prices for articles required herein - one that is based on compliance with the First Article Approval Requirements and
one that is based on a waiver of such requirements. Where an offeror submits only one price and fails to clearly state that the price is based on waiver of the First Article Approval Requirements it will be deemed to be based on compliance with the First
Article Approval Requirements
(C) In the event of the First Article Approval Requirement is granted, the delivery schedule for the production items shall be reduced by the number of days designated for delivery of First Article Test unit plus the number of calendar days indicated for the
government notification of conditional approval or approval. These requirements are specified in the quality assurance section of this solicitation. If the offeror is unable to meet the desired schedule, he shall insert below the alternate delivery schedule
he offers to the government.
Offeror's Proposed Alternate Delivery Schedule
(Based on waiver of First Article Approval Requirements)
Within Days:
Item No. _____________ Quantity:_______ After Date of Contract:_________
4.11 . Mandatory Inspection Requirements:
100% Procurement Contracting Officer (PCO) mandatory inspection is required and shall be accomplished at source under the surveillance and final approval of the cognizant DCMAO Quality Assurance Representative (QAR).
During production, mandatory inspection is required to be accomplished by the contractor as follows:
A. Level of Inspection (LOI).
1. Critical characteristics: 100% inspection shall apply.
2. Major and Minor characteristics: LOI shall be in accordance with a sampling plan acceptable to the QAR.
B. Critical characteristics:
;Roy Janney NAWCADLKE QA / Tel: (732)-323-2834
E-mail: roy.a.janney.civ@us.navy.mil;
C. Major and Minor characteristics
1. Shall be defined by the contractor subject to QAR concurrence, unless defined on applicable drawings and associated specifications.
4.12 SPECIAL INSPECTION REQUIREMENTS
( ;APPLIES; ) MAGNETIC PARTICLE INSPECTION
( ;APPLIES; ) SURFACE INSPECTION
( ; ; ) PENETRANT INSPECTION
( ;N/A; ) RADIOGRAPHIC INSPECTION
( ;N/A; ) ULTRSONIC INSPECTION
( ;N/A; ) HIGH SHOCK TEST
( ;N/A; ) MECHANICAL VIBRATION TEST
4.13 FINAL INSPECTION REQUIREMENT:Due to the critical nature of this item, representatives of the buying
office/and the cognizant field activity, NAWC Lakehurst, shall be notified by the successful contractor at least 14 days prior to presentation to the DCM QAR of the items for final inspection so that they may have the option of
witnessing the final inspection. The contractor shall notify by email or
TELEFAX PCO and NAWC Lakehurst QA ;Roy Janney NAWCADLKE QA / Tel: (732)-323-2834
E-mail: roy.a.janney.civ@us.navy.mil; to arrange for the final inspection.The authority of the QAR shall not be abrogated. If the notification is not given to both sites then the QAR shall not accept the units.
5. PACKAGING- MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE
6. NOTES - NOT APPLICABLE
THIS IS A CRITICAL SAFETY ITEM.
FOR DRAWING UPDATES, SEE ATTACHED NAWC LKE DRAWING UPDATE SHEET.
FOR NAVICP REFERENCE ONLY: PROCUREMENT TDR 24-10082 WAS UTILIZED TO BUILD TDP
THE COMPONENTS BEING ACQUIRED UNDER THIS SOLICITATION HAVE BEEN CLASSIFIED AS"CRITICAL" REQUIRING ENGINEERING SOURCE APPROVAL BY NAVAL AIR SYSTEMS COMMAND. ONLY THOSE COMPANIES WHO HAVE BEEN APPROVED WILL BE ELIGIBLE FOR AWARD UNDER THIS SOLICITION. ANY COMPANY
NOT PREVIOUSLY APPROVED MAY SUBMIT A SOURCE APPROVAL REQUEST AS OUTLINED LATER IN THIS SOLICITATION.
\

DATE OF FIRST SUBMISSION=ASREQ
16. REMARKS:
(BLOCK 12): Concurrently with delivery of FAT items.
Inspection/Certification data needed to substantiate the Quality of the First Article Test unit shall be included in First Article unit packaging. The outside of the package that contains the data shall be clearly marked "INSPECTION/CERTIFICATION DATA INCLUDED".
Data Requirements:
a. Copies of all approved requests for variations.
b. Identification per Drawings 510872, 323195, 323196, B408573, 416328, 416330, 416332, 418772, 420340, 510875, 511224, 514822, 514823.
c. Assembly per Drawings 510872, 511224.
d. Design requirements per Note 1 of Drawing 416328.
e. Dimensional inspection per Drawings 323195, 323196, B408573, 416328, 416330, 416332, 418772, 420340, 510875, 511224, 514822, 514823.
f. Surface finish (of bare metal) per Drawings 323195, 323196, 418772, 420340, 510875, 511224, 514822, 514823.
g. Heat treatment per Drawings 416330, 418772, 510875, 514822.
h. Magnetic particle inspection per Drawings 416330, 418772, 420340, 510875, 511224, 514822, 514823.
i. Material properties per Drawings 323195, 323196, B408573, 416330, 416332, 418772, 420340, 510875, 511224, 514822, 514823.
j. Thread dimensions and designations per Drawings B408573, 511224. Documentation shall include verification that the pitch and functional diameters were 100% inspected in accordance with System 22 of FED-STD-H28/20.
k. Welding per Note 13 of Drawing 514823.
l. Magnetic particle inspection of Area "X" and Section "D-D" of Drawing
514822 prior to chromium plating.
m. Dimensional inspection in Area "X" and Section "D-D" of Drawing 514822 prior to chromium plating.
n. Hardness testing in Area "X" and Section "D-D" of Drawing 514822 prior
to chromium plating.

DATE OF FIRST SUBMISSION=ASREQ
16. REMARKS:
(BLOCK 12) Concurrently with Final Inspection.
Data Requirements:
a. Copies of all approved requests for variations.
b. Identification per Drawings 510872, 323195, 323196, B408573, 416328, 416330, 416332, 418772, 420340, 510875, 511224, 514822, 514823.
c. Assembly per Drawings 510872, 511224.
d. Design requirements per Note 1 of Drawing 416328.
e. Dimensional inspection per Drawings 323195, 323196, B408573, 416328, 416330, 416332, 418772, 420340, 510875, 511224, 514822, 514823.
f. Surface finish (of bare metal) per Drawings 323195, 323196, 418772, 420340, 510875, 511224, 514822, 514823.
g. Heat treatment per Drawings 416330, 418772, 510875, 514822.
h. Magnetic particle inspection per Drawings 416330, 418772, 420340, 510875, 511224, 514822, 514823.
i. Material properties per Drawings 323195, 323196, B408573, 416330, 416332, 418772, 420340, 510875, 511224, 514822, 514823.
j. Coating per Drawings 510875, 514822, 514823.
k. Thread dimensions and designations per Drawings B408573, 511224. Documentation shall include verification that the pitch and functional diameters were 100% inspected in accordance with System 22 of FED-STD-H28/20.
l. Plating per Note 8 of Drawing 514822.
m. Welding per Note 13 of Drawing 514823.
n. Nitride hardening per Note 4 of Drawing 420340.
o. Magnetic particle inspection of Area "X" and Section "D-D" of Drawing 514822 prior to chromium plating.
p. Dimensional inspection in Area "X" and Section "D-D" of Drawing 514822 prior to chromium plating.
q. Hardness testing in Area "X" and Section "D-D" of Drawing 514822 prior to chromium plating.

DATE OF FIRST SUBMISSION=090 DAC
16. REMARKS:
(Block 5) Data Requirements:
a. Weld procedure IAW NAVSEA S9074-AR-GIB-010/278^ para 4.2 per Drawing 514823.
(Block 13) DATE OF SUBSEQUENT SUBMMISION: Approval or reason for disapproval shall be given by NAVAIRWARCENACDIVLKE via the P.C.O. NLT 45 days after disapproval.
(Block 14) Addresses for NAVAIR Codes:
NAVAIRWARCENACDIVLKE
Code BL14000 Bldg 596
HWY 547
JOINT BASE MDL, NJ 08733-5000
NAVAIRWARCENACDIVLKE
Code BL32300 Bldg 562
HWY 547
JOINT BASE MDL, NJ 08733-5000
NAVAIRWARCENACDIVLKE
Code BL41600 Bldg 148
HWY 547
JOINT BASE MDL, NJ 08733-5000
The Welding Procedures will be used by the Government to verify contractor designated welding responsibilities implement weld procedures for each cont ractor, subcontractor or welding entity performing welding on specific work specifications

DATE OF FIRST SUBMISSION=090 DAC
16. REMARKS:
(Block 5 ) Data Requirements:
a. The Weld Procedure Qualification Test Report, including all supporting test reports and documentation, IAW NAVSEA S9074-AQ-GIB-010/248^ para 4.2.3 and 4.6 Drawing 514823.
(Block 13) DATE OF SUBSEQUENT SUBMMISION: Approval or reason for disapproval shall be given by NAVAIRWARCENACDIVLKE via the P.C.O. NLT 45 days after disapproval.
(Block 14) Addresses for NAVAIR Codes:
NAVAIRWARCENACDIVLKE
Code BL14000 Bldg 596
HWY 547
JOINT BASE MDL, NJ 08733-5000
NAVAIRWARCENACDIVLKE
Code BL32300 Bldg 562
HWY 547
JOINT BASE MDL, NJ 08733-5000
NAVAIRWARCENACDIVLKE
Code BL41600 Bldg 148
HWY 547
JOINT BASE MDL, NJ 08733-5000

DATE OF FIRST SUBMISSION=ASREQ
16. REMARKS:
(Block 5) CONTRACT REFERENCE:
a. Evidence of Welder Performance Qualification, including supporting test results and documentation, IAW NAVSEA S9074-AQ-GIB-010/248^ para 5.2 per Drawing 514823.
(Block 12) DATE OF FIRST SUBMISSION - 30 days prior to production.
(Block 13) Provide qualification evidence for all welders.
(Block 14) Addresses for NAVAIR Codes:
NAVAIRWARCENACDIVLKE
Code BL32300 Bldg 562
HWY 547
JOINT BASE MDL, NJ 08733-5000
NAVAIRWARCENACDIVLKE
Code BL41600 Bldg 148
HWY 547
JOINT BASE MDL, NJ 08733-5000

DATE OF FIRST SUBMISSION=090 DAC
16. REMARKS:
(Block 5) CONTRACT REFERENC:
a. Evidence of Level III Certification IAW T9074-AS-GIB-010/271^ para 1.6 for the individual who approved the Welders Qualification Training Program IAW NAVSEAS9074-AQ-GIB-010/248 para 5.2.3.1, per Drawing 514823.
(Block 14) Addresses for NAVAIR Codes:
NAVAIRWARCENACDIVLKE
Code BL32300 Bldg 562
HWY 547
JOINT BASE MDL, NJ 08733-5000
NAVAIRWARCENACDIVLKE
Code BL41600 Bldg 148
HWY 547
JOINT BASE MDL, NJ 08733-5000

DATE OF FIRST SUBMISSION=090 DAC
16. REMARKS:
(Block 5) CONTRACT REFERENCE:
a. Visual Inspection Written Procedure to be used to visually inspect all welds IAW T9074-AS-GIB-010/271^ para 8.3 and 1.7 thru 1.7.3 per Drawing 514823.
(Block 14) Addresses for NAVAIR Codes:
NAVAIRWARCENACDIVLKE
Code BL32300 Bldg 562
HWY 547
JOINT BASE MDL, NJ 08733-5000
NAVAIRWARCENACDIVLKE
Code BL41600 Bldg 148
HWY 547
JOINT BASE MDL, NJ 08733-5000

DATE OF FIRST SUBMISSION=090 DAC
16. REMARKS:
(Block 3) SUBTITLE: Welder Qualification Training Written Procedure.
(Block 5) CONTRACT REFERENCE:
a. Evidence of approval of the Welder Qualification Training Program IAW NAVSEAS9074-AQ-GIB-010/248^ para 5.2.3.1(d), per Drawing 514823.
(Block 14) Addresses for NAVAIR Codes:
NAVAIRWARCENACDIVLKE
Code BL32300 Bldg 562
HWY 547
JOINT BASE MDL, NJ 08733-5000
NAVAIRWARCENACDIVLKE
Code BL41600 Bldg 148
HWY 547
JOINT BASE MDL, NJ 08733-5000

DATE OF FIRST SUBMISSION=090 DAC
16. REMARKS:
(Block 5) CONTRACT REFERENCE:
b. Evidence of Maintenance of Qualification for all welders IAW NAVSEA S9074-AQGIB-010/248^ para 5.2.11 and 5.2.12 per Drawing 514823.
(Block 14) Addresses for NAVAIR Codes:
NAVAIRWARCENACDIVLKE
Code BL32300 Bldg 562
HWY 547
JOINT BASE MDL, NJ 08733-5000
NAVAIRWARCENACDIVLKE
Code BL41600 Bldg 148
HWY 547
JOINT BASE MDL, NJ 08733-5000

Opportunity closing date

09 December 2024

Value of contract

to be confirmed